Overview
The Rubicon Express Twin-Tube Shock Absorber Kit, part number SK010634RXT, is a complete set of lift shocks for a 3.5 to 4.5 inch lift. Confirm the valving and series match your application before installing.
Mounting is specified by position: stem to loop at the front and loop to loop at the rear.
Key features
- Complete set of lift shocks
- Valved for leaf and coil spring applications
- Stem-to-loop front mounts and loop-to-loop rear mounts
- Gas charged, per the specifications
Matching shocks to the lift
Lift shocks do most of their work when the suspension is extended beyond stock, so the shock length and mounting geometry have to suit the height of the lift. A shock that is too short can bottom out on the bump stops, while one that is too long can bind at full droop. Matching the kit to the lift range you run is the first step in getting a predictable ride.
Mount geometry matters as much as length. Stem-to-loop and loop-to-loop ends pivot differently, so a worn bushing or a bent bracket at one end can change how the shock loads under compression. Before a full installation, check that the bushings are seated square and the threads on the stem are clean and undamaged. Tighten all fasteners to factory torque values from a service manual.
- Check mount bushings for cracking or play
- Confirm stem and loop orientation before tightening
- Re-check fasteners after the first few trail runs
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | SK010634RXT |
| UPC | 614901450491 |
| Lift | 3.5 to 4.5 inch |
| Front mounts | Stem to loop |
| Rear mounts | Loop to loop |
| Charge | Gas |
| Quantity | Complete set |
Vehicle fitment
Verify the year, model and trim of your vehicle match the kit before ordering, and check the lift height against the 3.5 to 4.5 inch range.
Installation notes
The front and rear mount styles differ, so confirm each end matches the mounts on your vehicle before installing.







