Overview
The Rubicon Express Twin-Tube Shock Absorber Kit, model SK010404RXT, is a complete set of lift shocks. It is a leaf spring valved twin-tube shock with a loop-to-loop configuration and a hydraulic, gas-charged shock series.
Match the set to your suspension, including the lift height you run, before ordering.
Key features
- Complete set of lift shocks
- Valved twin-tube design for leaf spring suspensions
- Loop-to-loop configuration
Setting up lift shocks
Lift shocks are longer than stock shocks, so they are used to control a suspension that has been raised. The extra length gives the shock room to work at the new height, and the valving is set to suit a leaf spring setup, where the axle moves differently than on a coil system. Choose shocks for the ride height you run rather than the one you hope to reach later.
Loop-to-loop mounts use eyelets at both ends, which allow the shock to pivot. Check the bushings and mounting hardware at each service, and watch for leaks at the shock body. Replace the set as a unit when wear is uneven so the damping stays balanced front to rear. Leaf spring suspensions also benefit from a clean axle pivot, so check the shackle bolts during installation.
- Confirm the lift height before ordering
- Inspect eyelet bushings for cracks
- Check for leaks at the shock body
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | SK010404RXT |
| UPC | 614901450330 |
| Shock type | Twin-tube, hydraulic / gas charged |
| Mounting configuration | Loop to loop |
| Kit contents | Complete set of lift shocks |
Vehicle fitment
No vehicle is named for this kit. Confirm the vehicle, year and lift height the set is designed for before ordering.
Confirm your vehicle’s year, model and trim before ordering.






