Overview
The Rugged Ridge ORV leaf spring perch, part number 18267.03, is a steel perch 2.5 inches wide that is welded onto 3-inch diameter axle tubes to seat a leaf spring. ORV Suspension makes it as a general-purpose perch rather than one built for a named vehicle, so the axle tube diameter is the main measurement to check.
Key features
- Steel construction
- 2.5 inches wide
- Built for 3-inch diameter axle tubes
- Weld-on design with no drilling required
Preparing the axle for welding
A weld-on perch is a fabrication job, so the quality of the weld and the condition of the tube matter as much as the part itself. Clean the paint, rust and dirt from the area first, and mark the perch position so the spring seats square. Fit the perch dry before welding to confirm the spring sits where it should.
After welding, let the joint cool naturally and inspect it closely. Check that the perch sits square to the axle and that the spring pack does not rub against anything. Recheck the spring position once the vehicle is back on the ground, since small offsets change how the leaf pack loads.
- Clean the tube and remove paint before tacking
- Dry-fit the perch and mark the spring position
- Let the weld cool naturally before loading the spring
- Inspect the weld toes after the first few drives
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 18267.03 |
| UPC | 804314221881 |
| Type | Leaf spring perch |
| Manufacturer line | ORV Suspension |
| Material | Steel |
| Width | 2.5 inches |
| Axle tube diameter | 3 inches |
| Mounting | Weld-on |
Vehicle fitment
This is a general-purpose perch sized for 3-inch diameter axle tubes, so it suits any axle with tubes of that size. Measure your tube before ordering.
No specific Jeep, truck or other model is named. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This perch is a weld-on part, so the job is fabrication rather than a bolt-on install. Confirm the axle tube measures 3 inches in diameter before cutting or welding, and have a qualified welder complete the work.
What’s included
Check the package contents against your installation before starting, including the quantity and any hardware you need.












