Overview
The Rubicon Express RE1910 is an offset weld-on spring pad for springs 2 inches wide. One individual spring perch is included, and it is a universal builder part, so it is not tied to a particular vehicle.
The pad is made from 1/4-inch steel with a 6-inch contact area for the spring. The offset makes welding against the front differential easier, and the taller profile allows steering clearance under the spring. It is not suitable for spring-under applications.
Key features
- Offset weld-on design
- Built for 2-inch wide springs
- 1/4-inch steel construction
- 6-inch contact area with the spring
- Center pin holes for wheelbase adjustment
- Taller profile for steering clearance
Welding a spring pad safely
A spring pad carries the spring load into the axle, so the weld has to be sound and the pad has to sit square. Surface prep matters: remove paint, rust, and mill scale from the contact points, then fit the pad before welding so you can check its angle and clearance against the spring and steering components.
Heat from welding can distort thin steel, so work in short passes and let the part cool between them. After installation, inspect the weld toes for cracks and make sure the spring still seats fully on the 6-inch contact area. A pad that rocks or looks off-square should be corrected before the vehicle sees trail use.
- Grind to clean metal before tacking
- Check steering clearance under the taller profile
- Re-inspect the welds after the first few outings
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1910 |
| UPC | 614901439878 |
| Type | Perch |
| Spring width | 2 inches |
| Offset | Yes |
| Steel thickness | 1/4 inch |
| Contact area | 6 inches |
| Quantity | One individual perch |
| Fitment | Universal fit |
Vehicle fitment
No vehicle is named for this universal fit perch. Confirm the spring width and axle mounting before welding it in.
Confirm the spring width and that a conventional under-axle mount suits your build before ordering.
Installation notes
The perch is welded on, so it needs a qualified welder to place it against the axle or front differential.





