Overview
The Rubicon Express RE1182 is a Gen II shoulder bolt and spacer for sway bar link disconnects. It is a universal-fit part with no specific vehicles named.
Choosing a disconnect setup
A sway bar link disconnect lets the bar decouple from the suspension, so the axle can move more freely off road. Where a link is disconnected, the shoulder bolt and spacer hold the link end in place and keep the joint from shifting under load. Since the bolt and spacer must match the existing joint, start by comparing diameter, length and spacer thickness with the hardware already on the vehicle.
Many owners replace the link bolt and spacer together with the disconnect itself, since worn bushings and bolts often wear at the same pace. Inspect the spacer for cracks, flat spots and galling, and look for play in the joint when the axle is lifted. Tighten fasteners to the torque given in the vehicle’s service information and re-check them after the first few trail runs.
- Match bolt diameter and length to the existing hardware
- Inspect the spacer for cracks, flat spots and galling
- Re-check fasteners after the first few trail runs
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1182 |
| UPC | 614901437454 |
| Product line | Gen II |
| Component | Shoulder bolt and spacer |
| Application | Sway bar link disconnect |
Vehicle fitment
Check the bolt and spacer against your sway bar link hardware before ordering. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
A shoulder bolt and spacer. Check the package contents against your installation before starting.


