Select your vehicle

Trail Gear Panhard Axle Bracket – 110147-1-KIT

Trail Gear

Shop Trail Gear Track Bar Brackets on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Plate steel link mount, 3/16 inch plate
  • Upgrades factory brackets
  • Supports a leaf spring to 3-link or 4-link swap
  • Part number 110147-1-KIT, UPC 70000621335

Description

Overview

The Trail Gear Panhard axle bracket, part number 110147-1-KIT, is a link mount made from 3/16 inch plate steel, designed to upgrade factory brackets. A Panhard bar, also called a track bar, locates the axle side to side, and this bracket is categorized as a track bar bracket.

The mount makes a swap from leaf springs to a 3-link or 4-link system easier. Confirm fit for your vehicle’s year, model and trim before ordering.

Key features

  • 3/16 inch plate steel construction
  • Upgrades the factory brackets
  • Eases a swap from leaf springs to a 3-link or 4-link system
  • Misc. mounting tab design, with tube diameter Any

Panhard bar geometry

A Panhard bar locates the axle side to side, keeping the rear end centered under the body as the suspension travels. The bar length and mounting height set how much lateral movement the axle makes, and a worn bar or loose end lets the axle shift. When the rear is changed to a 3-link or 4-link layout, the bar often needs to be relocated, since the link geometry changes the path of the axle.

Before installing a new bracket, inspect the bar ends and bushings for play and replace any that are worn. After mounting, check that the bar is centered and that the axle moves freely through its travel. Recheck the fasteners after the first few drives, because a new mount settles under load.

  • Inspect the bar ends for play
  • Check centering after the first drive
  • Recheck fasteners after initial use

Specifications

Brand Trail Gear
Part number 110147-1-KIT
UPC 70000621335
Material Plate steel
Plate thickness 3/16 inch
Type Misc. mounting tab
Tube diameter Any
Sold as Single

Vehicle fitment

No vehicle years, makes or models are listed. The Universal Fit tag is the only fitment note, and a bracket that replaces factory mounts has to match the mounting points it bolts to, so check those points before ordering.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Check whether the mount bolts on or needs drilling or welding before starting the install.

What’s included

One link mount, sold as a single unit.

SKU: TGI110147-1-KIT Category:

Specification

Shipping weight 3.00 lbs
Package dimensions 13.00 × 13.00 × 4.50 in
brands

Questions & Answers

What is this bracket made from?

It is made from 3/16 inch plate steel as a link mount that upgrades factory brackets. Check the mounting points on your axle and frame before installing, since a bracket that replaces factory mounts must match them.

Will this bracket fit my vehicle?

Check the mounting points against your axle and frame before ordering, since the bracket replaces factory mounts and the Universal Fit tag is the only fitment note.

Can this bracket be used for a leaf spring to 3-link or 4-link swap?

Yes, the mount makes a leaf spring to 3-link or 4-link swap easier. It is a single link mount, so plan the other links, brackets and axle mounts for the conversion separately.

Does a Panhard bracket change need the bar replaced too?

Often yes. Worn Panhard bar bushings or ends should be replaced with the bracket, since loose ends allow side to side axle movement. Check bar length and centering after installation.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Trail Gear Track Bar Brackets on Amazon