Overview
The Rubicon Express JK4300 is an extreme-duty radius long arm upgrade kit with a 4-link front and 3-link rear layout. Confirm fit for your vehicle’s year, model and trim before ordering.
Radius arms set the axle’s fore-and-aft position and control its movement, so an arm upgrade of this type replaces the stock arms on the vehicle it is matched to.
Key features
- Extreme-duty radius long arm design
- Four-link front layout
- Three-link rear layout
Before you install
Radius arms locate the axle and control how it moves under acceleration, braking and articulation, so a kit like this changes more than the arm itself. Before fitting it, measure the existing arm mounts, the axle pinion angle and the driveline, since any change in arm position shifts those angles. Plan on re-checking alignment and driveline operating angles after the install, and inspect the brake lines and fuel lines for clearance at full droop.
Bushings and mounting hardware wear over time, so look for play at each joint, cracked welds and torn bushings during regular service. Lubricate or replace bushings as they age, and retighten fasteners after the first few trail runs. A kit built for hard use is only as good as the frame and axle mounts it bolts to, so inspect those points before adding load.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JK4300 |
| UPC | 70000707132 |
| Front arm layout | 4 link |
| Rear arm layout | 3 link |
| Fitment type | Direct fit |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Check the arm mounting points against your frame and axle before installing.
Confirm the year, model and trim of your vehicle before ordering, since the kit’s fit depends on them.
Installation notes
Radius arm kits change suspension geometry, so alignment and driveline angles should be checked after installation.
What’s included
The kit is an upgrade set of radius long arms. Check the package contents against your installation before starting.




