Overview
The Rubicon Express 5.5 Inch Coil Spring, part number RE1379, is a pair of rear coil springs for V8 conversions only. It is a direct fit for the 2007–2018 Jeep Wrangler (JK).
The coils are designed to balance ride quality with durability and load capacity. Each coil is powder coated silver and is tested before shipping.
Key features
- Pair of rear coil springs, 5.5 in. per the product name
- Rated for V8 conversions only.
- Designed to balance ride quality, durability and load capacity
- Powder coated silver finish
- Each coil tested against Rubicon Express specifications
Coil spring replacement tips
Rear coils carry the weight of the rear axle and the cargo load, so they wear along with the rest of the suspension. When one side sags or sits lower, the other side usually needs replacing too, since mismatched height and rate can pull the vehicle out of level. Replacing the coils as a pair keeps both rear corners matched and makes handling more predictable.
Coil changes also affect the shocks, bump stops and driveline angles. Check the shock length and travel once the new coils are in, and inspect the bump stops for cracks or flattening. Because these springs are for V8 conversions, confirm the rest of the drivetrain and mounts match that setup before the first drive.
- Replace coils in pairs
- Check shock length after the change
- Inspect bump stops and spring pads
- Recheck driveline angles after the lift
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1379 |
| UPC | 614901219333 |
| Position | Rear |
| Quantity | Pair |
| Size | 5.5 in. |
| Finish | Powder coated silver |
| Application | V8 conversions only |
| Fitment type | Direct fit (per Rubicon Express) |
Vehicle fitment
The coils fit the 2007–2018 Jeep Wrangler (JK), and the V8 conversion requirement applies to the coils on that vehicle.
The list does not include the Wrangler TJ, LJ or JL, or other Jeep models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the pair is for V8 conversions only, confirm that the vehicle has a V8 conversion before installing.
Rear coil springs are generally replaced in pairs so that both sides match in height and rate.
What’s included
A pair of coil springs. Check spring pads, isolators and hardware against your installation before starting.






