Overview
The Rubicon Express JK4423 is a 3.5-inch extreme-duty 4-link long arm lift kit, offered without shocks. It belongs to Rubicon Express’s JK suspension line. The adjustable chromoly upper and lower control arms use Super-Flex spherical ball joints and PT-Meg Super-Ride bushings, and the full-width transmission crossmember is part of the drivetrain mounting design.
The 4-link long arm is built to add control while keeping articulation. The kit is designed for installation without welding, and the full-width transmission crossmember is part of that design. Optional high-performance monotube shocks, a belly pan and a CNC-machined steering knuckle are available as add-ons. The lift height range for this kit runs from 3 to 4.99 inches.
Key features
- 3.5-inch lift height, within the 3 to 4.99-inch range
- Extreme-duty 4-link long arm system
- Adjustable chromoly upper and lower control arms
- Super-Flex spherical ball joints
- PT-Meg Super-Ride bushings
- Full-width transmission crossmember
- Designed for installation without welding
- Optional monotube shocks, belly pan and steering knuckle
Choosing shocks and steering parts
Long arm 4-link systems change how the axle moves and where the forces go. The arms control the axle in fore and aft directions, so the mounting points and crossmember carry more load than on a stock setup. Because no shocks come with this kit, the shock choice should match the arm geometry and the intended use.
Steering components are often the next thing to review. A belly pan protects the lower front of the vehicle, while a steering knuckle upgrade can change how the front end handles stress. Check tie rods, drag links and stops for clearance after the install, and confirm that the axles have enough room to articulate.
Bushings and ball joints should be checked at each service, since they take the loads from the arms. Look for play, cracked bushings and worn joints. Grease fittings, where fitted, should be serviced on schedule.
- Check shock choice against the 3.5-inch height
- Inspect ball joints and bushings at each service
- Confirm steering stops and axle clearance after installation
- Recheck driveline angles after the first trail runs
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JK4423 |
| UPC | 70000651249 |
| System type | Extreme-duty 4-link long arm lift |
| Lift height | 3.5 inches (chart range 3 to 4.99 inches) |
| Control arms | Chromoly upper and lower, adjustable |
| Joints | Super-Flex spherical ball joints |
| Bushings | PT-Meg Super-Ride |
| Shocks | Not included |
Vehicle fitment
It is part of the JK suspension line, so it is built for JK-platform vehicles. Verify your exact year, model and trim before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 4-link arms change control arm angles and pinion geometry, so the alignment and driveline angles should be checked after the install.
What’s included
The named parts are the adjustable chromoly control arms, Super-Flex spherical ball joints, PT-Meg Super-Ride bushings and the full-width transmission crossmember.
Not included: shock absorbers.
The control arms are the main change to the front and rear geometry, and the full-width transmission crossmember ties into the drivetrain mounts. Optional high-performance monotube shocks and a belly pan or CNC-machined steering knuckle can be added to the system if the build calls for them.


