Overview
The Rancho RS55238 is a rear shock absorber from the RS5000X Series. It is a gas pressurized twin tube shock with a 16 mm nitro carburized rod and a full displaced 35 mm bore, fitting the 1997-2003 Ford F-150 and the 2004 Ford F-150 Heritage.
The valving combines a patented rebound system with an advanced compression phase, aimed at better handling and performance on and off road. Progressive engagement and a tuned compression control valve make up the valving.
Key features
- Progressive engagement valving
- Tuned compression control valve
- 16 mm nitro carburized rod
- Full displaced 35 mm bore
- Glass filled and Fluon banded piston
- Rebound bumper and double welded loops
- Low friction, self lubricating seal
Rebound and compression explained
Shock absorbers convert motion into heat as fluid is forced through valves. Rebound controls the return stroke after the wheel drops into a hole, and compression controls the stroke as the wheel rises. Balanced control in both directions keeps the truck stable and the tires in contact with the ground.
Progressive valving stiffens the damping as the shock moves further, which helps control larger impacts without making every small bump harsh. Gas pressurized twin tube bodies tend to keep the fluid under pressure, which supports steady damping during repeated hits. Compare the rebound bumper and seal condition when inspecting an older shock.
Before replacing a rear shock, look for fluid leaks, a bent or pitted rod and noise over bumps. Bushings and mounts often wear alongside shocks, so inspect them at the same time. If you run a lift, check that the shock length and mounts still suit the new suspension geometry.
- Inspect the rod for pitting or bends
- Look for fluid on the body after trail runs
- Replace worn bushings with the shock
- Recheck mount bolts after installation
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS55238 |
| UPC | 39703008846 |
| Series | RS5000X Series |
| Position | Rear |
| Body | Enlarged twin tube |
| Rod | 16 mm nitro carburized |
| Bore | Full displaced 35 mm |
| Piston | Glass filled, Fluon banded |
| Valving | Progressive engagement, tuned compression control valve |
| Rebound | Rebound bumper |
| Gas charge | Gas pressurized |
| Bushings | Black natural |
| Seal | Low friction, self lubricating |
| Welded loops | Double welded |
| Lift rating | w/4 in. Lift |
| Included | Protective boot |
Vehicle fitment
It is a direct fit for the 1997-2003 Ford F-150 in Base, King Ranch, Lariat, XL and XLT trims, and for the 2004 Ford F-150 Heritage in XL and XLT trims. Other 2004 trims fall outside this fit.
Later F-150 model years are not in the list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
A protective boot is included.












