Overview
The Rancho RS999367 is a rear RS9000XL Series shock absorber for the 2009–2010 Dodge Ram 1500 and the 2011–2018 Ram 1500. It has a 2.75-in. (70mm) liquid metallic body around an 18mm Nitro Carb rod, built for both work and play on and off the road.
It is nitrogen gas charged and uses fade resistant hydraulic fluid. It works with the My Ride 9-position adjustable ride tuner.
Key features
- 9-position tuning that works with the My Ride adjustable ride tuner
- 18mm Nitro Carb rod
- Fade resistant hydraulic fluid
- Nitrogen gas charge
- Polyurethane bushings
- Protective boot included
- Rear position, direct fit
Replacing rear shocks
Rear shocks on a half-ton pickup do more than control bounce. They absorb impacts from ruts and washboard, help keep the tires in contact with the ground, and carry part of the load when the truck is loaded or towing. When a shock wears out, the truck may bounce longer after bumps, sway in turns or dive under braking. Replacing a worn unit restores control, and both sides of the axle are usually done together so they respond the same way.
Adjustable units add another decision. A nine-position setting lets you firm the ride for heavy loads or soften it for daily driving, but match the setting to how you use the truck rather than changing it constantly. Inspect the bushings and boot at each oil change or tire rotation, and replace the shock if the body shows fluid leaks.
- Check both rear shocks for leaks and mount wear
- Note the tuning setting before removing the old unit
- Tighten mounting fasteners to the vehicle’s specification
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999367 (shown as RANRS999367) |
| Series | RS9000XL |
| Position | Rear |
| Body diameter | 2.75-in. (70mm) |
| Rod | 18mm Nitro Carb |
| Hydraulic fluid | Fade resistant |
| Charge | Nitrogen gas |
| Bushings | Polyurethane |
| Finish | Liquid metallic |
| Tuning | 9-position |
| Lift height | 0 in. lift/drop |
| Fitment type | Direct fit |
Vehicle fitment
The 2009–2010 Dodge Ram 1500 entry covers Laramie, SLT, ST and Sport trims. The 2011–2018 Ram 1500 entry covers Big Horn, Express, HFE, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, R/T, Rebel, SLT, ST, Special Service, Sport, Tradesman and Tradesman HD trims.
Ram 2500 and 3500 models and Ram 1500 model years from 2019 onward fall outside the fitment range. Confirm fit for your vehicle’s year, model and trim before ordering.
What’s included
A protective boot is included. Check the package contents against your installation before starting.














