Overview
The Rancho RS999060 is a rear RS9000XL Series shock absorber for 1988–2000 Chevrolet and GMC trucks, covering the Blazer, K1500 and K1500 Suburban, K2500 Suburban, Tahoe and Yukon. It is rated for a 5 to 6 in. lift and fits the models shown as a direct replacement.
Rear shocks control how the axle rebounds after bumps, so adjustable damping suits trucks whose load changes. This unit has nine damping positions, a 2.75-in. (70mm) body and an 18mm chrome piston rod. It is gas charged and built with red urethane bushings.
The finish is liquid metallic, and a protective boot is included to shield the rod. Coverage is a Limited Lifetime Warranty, with a 90-Day Free Ride Offer also available.
Key features
- Rear position, rated 5 to 6 in. lift
- 9-position myRide manual or remote tuning
- Gas charged body
- 2.75-in. (70mm) body diameter
- 18mm chrome piston rod
- Red urethane bushings
- Liquid metallic finish
- Protective boot included
Rear axle control on older trucks
The rear shock controls how the axle rebounds after a bump and keeps the tires planted on rough pavement. On trucks from this era, leaf or coil springs do much of the work, and a worn rear damper lets the body keep bouncing after a dip. Shocks that wear unevenly can also cause cupping on the rear tires.
Rear shocks are usually changed in pairs so both sides have matching damping. When the axle is heavily loaded, such as with a bed full of gear, a firmer setting can help control rebound. Keep the rod clean and check the boot for splits, because a damaged boot lets grit reach the seal. Inspect the mounting bushings at the same time.
- Check for fluid on the body
- Look for uneven tire wear
- Test rebound by pushing down on the corner
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999060 |
| UPC | 10039703090602 |
| Shock series | RS9000XL |
| Position | Rear |
| Lift rating | 5 to 6 in. lift |
| Body diameter | 2.75 in. (70mm) |
| Piston rod | 18mm chrome |
| Tuning | 9-position myRide manual or remote |
| Charge | Gas charged |
| Bushings | Red urethane |
| Finish | Liquid metallic |
| Fitment type | Direct fit |
| Warranty | Limited Lifetime Warranty |
Vehicle fitment
Direct fit for: 1992–1994 Chevrolet Blazer (Base, Cheyenne, Silverado, Silverado Sport); 1988–1998 Chevrolet K1500 (Base, Cheyenne, Scottsdale, Silverado, Sport, WT); 1992–1999 Chevrolet K1500 Suburban (Base, LS, LT, Silverado); 1992–1999 Chevrolet K2500 Suburban (Base, LS, LT, Silverado); 1995–2000 Chevrolet Tahoe (Base, LS, LT, Limited, Z71); 1988–1998 GMC K1500 (Sierra, Sierra SL, SLE, SLS, SLT, SLX, Special, Sport); 1992–1999 GMC K1500 Suburban (Base, SLE, SLT); 1993 GMC K2500 Suburban (SLE); and 1992–2000 GMC Yukon (Base, Denali, GT, SL, SLE, SLT, Sport).
Trucks from 2001 onward and the 1500 HD and 2500 HD lines are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The unit comes with a protective boot. Mounting hardware needs should be confirmed against your truck before the install begins.














