Overview
The Rough Country sway bar disconnects (part number R/C1146) are front quick-release links for Jeep models with a 3.5-inch to 6-inch suspension lift. They fit the 2007–2018 Jeep Wrangler JK, the 2018–2026 Jeep Wrangler JL and the 2020–2026 Jeep Gladiator.
Pulling the pin lets the front bar disconnect for more articulation off road. The links fold up and secure out of the way when not in use, so the bar stays connected for on-road handling and stability.
Key features
- Front quick disconnects with a pull pin
- Frame brackets included
- Hardware included
- Easy bolt-on installation
- Links fold up and secure out of the way
- Allows greater articulation off-road
Articulation and sway bar basics
A front sway bar resists body roll when the truck leans in a turn. On uneven trail, that same stiffness can limit how far the front axle can move. Disconnecting the bar lets each wheel travel more independently, which many off-road drivers use for steep or rocky sections. Reconnect the bar before returning to pavement so handling and stability are restored.
Quick disconnects add moving parts at the frame and at the bar. Check the pin, the link ends and the frame brackets regularly for wear, play or corrosion. Keep the pin clean and free of grit so it seats fully each time. If the bar clunks over bumps after reconnecting, inspect the bushings and end links before driving further.
- Inspect pins and links after each off-road trip
- Look for bent brackets or loose frame hardware
- Reconnect before highway driving
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C1146 |
| Position | Front |
| Lift required | 3.5 in to 6 in suspension lift |
| Fitment | Direct fit |
Vehicle fitment
Rough Country lists these disconnects for the 2020–2026 Jeep Gladiator, the 2007–2018 Jeep Wrangler (JK) and the 2018–2026 Jeep Wrangler (JL), in 2-door and Unlimited 4-door form. The list covers a wide range of trims, from the Rubicon and Sport to the Mojave and Willys.
The list does not include the TJ, LJ or YJ Wrangler or the Comanche. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The links are made for a lift of 3.5 inches to 6 inches. Confirm your lift height falls in that range before installing.
What’s included
Front sway bar disconnect links, frame brackets and hardware.







