Overview
The Rubicon Express RE1171 is an adapter bracket kit that mounts a Rubicon sway bar disconnect, or a straight end link with dual shock eye style bushings, to the factory front sway bar. The kit includes the mounting hardware and an offset lower mount that provides alignment. It is sold under part number RE1171.
It is for the 1993 to 1996 Jeep Grand Cherokee ZJ. Check the factory sway bar and mounting points of your vehicle before ordering.
Key features
- Adapter bracket kit for mounting a sway bar disconnect
- Also works with any straight end link that has dual shock eye style bushings
- Offset lower mount for proper alignment
- Mounting hardware included
- Direct-fit design.
Setting alignment
An adapter bracket changes where the disconnect or end link sits relative to the sway bar, so the angle of the link matters as much as the bracket. The offset lower mount is used to bring the link into line. Mock up the bracket and link before tightening anything, and check that the link moves through its travel without binding.
Factory sway bars vary in shape and mounting point, so look at the bar, the bracket’s contact surfaces and the frame clearance before installing. Related parts often replaced with an adapter kit include the end link bushings and the bar’s mounting bushings. Inspect them for cracking or wear, and recheck the bolts after the first few drives on rough ground.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1171 |
| UPC | 614901437393 |
| Type | Sway bar disconnect adapter bracket kit |
| Mount | Offset lower mount |
| Hardware | Mounting hardware included |
| Compatible links | Rubicon sway bar disconnects or any straight end link with dual shock eye style bushings |
Vehicle fitment
It fits the 1993 to 1996 Jeep Grand Cherokee (ZJ). Check that the model year falls within that range before ordering, and confirm the vehicle has the factory front sway bar this kit is designed for.
Fit is limited to the ZJ years, so confirm your year, model and trim before ordering.
Installation notes
The adapter bracket mounts to the factory front sway bar, so check the bracket fit against the bar before the disconnect or end link is attached. The offset lower mount is included to set the alignment, so install the bracket and then fit the link to check its angle.
What’s included
The package contains the adapter bracket kit with its mounting hardware and offset lower mount. A disconnect or end link is not included.








