Overview
The Rough Country Spare Tire Delete Kit, part number 10560, is a black powder-coated cover plate for the 2018–2026 Jeep Wrangler JL. It replaces the spare tire carrier with a laser cut plate that houses the license plate, backup camera and 3rd brake light.
The kit relocates the license plate and includes license plate lighting. It retains the factory backup camera and the factory 3rd brake light, and it provides a place to mount an optional rear-facing LED light bar for more illumination.
Key features
- Laser cut for precise fitment
- Durable black powdercoat finish
- Relocates the license plate and includes license plate lighting
- Retains the factory backup camera and 3rd brake light
- Plugs included for factory holes
- License plate mounting hardware included
- Optional LED light bar mounting
- No cutting or drilling required
Rear lighting and camera wiring
Removing the spare carrier moves a lot of the rear hardware into a new position. The backup camera and the third brake light still depend on their own wiring, so check that the harness has enough slack to reach the plate housing without pulling at the connectors or resting on the tailgate hinge.
If a light bar is planned, plan its wiring before the plate is installed. Route cables along existing harness paths, use a fused connection, and keep splices off the bodywork. A switch on the dash lets the bar run only when needed, which keeps the rear lighting from drawing power when the Jeep is parked.
After installation, test the reverse lights, the camera image and the brake light with the engine running and the ignition in each position. Recheck the plate mounting after the first few drives, because the plate and its brackets can settle slightly on rough roads.
- Test the camera image and brake light after installation
- Route any light bar wiring away from the tailgate hinge
- Use a fused connection for added lights
- Re-check plate mounting after the first drives
Specifications
| Brand | Rough Country |
|---|---|
| Part number | 10560 |
| Product type | Spare tire delete kit, backplate |
| Finish | Black powder coat |
| Installation | No cutting or drilling required |
| Included lighting | License plate lighting |
| Optional accessory | Rear-facing LED light bar |
| Fit type | Direct fit |
Vehicle fitment
The kit fits the 2018–2026 Jeep Wrangler JL, including the 2-door Sport, Sport S, Willys, Rubicon, Freedom and Islander models, the 4-door Unlimited versions up to the Rubicon 392, and the 4xe plug-in hybrid trims. Earlier Wranglers such as the JK are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Earlier Wranglers such as the JK are outside this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit installs without cutting or drilling. The plugs for the factory holes and the license plate mounting hardware come with it, and the LED light bar is optional.
What’s included
The delete plate, license plate lighting, plugs for the factory holes and the license plate mounting hardware.
Not included: the optional rear-facing LED light bar.









