Overview
The RockJock CE-9902-20B is a universal Antirock sway bar kit with a 44-inch bar and 20-inch steel arms. The Antirock sway bar is designed to balance the front and rear suspension for off-road use, and balancing the weight over all four tires can help keep them in contact with uneven ground.
The kit can replace a stock Jeep sway bar or be used in universal applications for a do-it-yourself fabricator. It is made of SAE 4130 heat-treated steel.
The kit includes all components, bushings, hardware and step by step installation instructions. It is mounted in a universal location and has a single rate spring rate.
Key features
- 44-inch bar and 20-inch steel arms
- SAE 4130 heat-treated steel
- Universal form for custom applications
- Bushings and hardware included
- Step by step installation instructions included
Fabrication planning for a sway bar
A universal sway bar kit leaves the mounting points, brackets and clearances to the builder. Before cutting or welding, measure the space between the axle and frame, plan the arm angles so the links move freely, and confirm there is room for the bar to rotate. Arm length and bar stiffness both change how the vehicle leans, so settle the layout before committing to a design.
Heat-treated steel holds its shape under repeated loads, but welds and bushing seats still need inspection. Use bushings that suit the bar diameter and mounting style, and check them after the first few trail runs. Sway bar kits are often installed with new end links and mounting hardware, so plan to replace those at the same time.
- Confirm bar clearance at full articulation
- Plan link angles before welding
- Inspect welds after the first few trail runs
- Replace worn end links with the bar
Specifications
| Brand | RockJock 4×4 |
|---|---|
| Part number | CE-9902-20B |
| Product type | Universal Antirock sway bar kit |
| Bar length | 44 inches |
| Arm length | 20 inches, steel |
| Material | SAE 4130 heat-treated steel |
| Mounting location | Universal |
| Spring rate | Single rate |
| Fitment type | Universal fit |
| Vehicle | No vehicle named |
Vehicle fitment
No vehicle is named for this kit. It is a universal fit and can replace a stock Jeep sway bar, but no make, model, year or trim is tied to the part. Confirm the application before fitting, since universal fit does not confirm suitability for a particular truck.
Because the kit is a vehicle-sized suspension part, universal fit does not confirm that it suits any particular truck. Confirm the application with RockJock before fitting.
What’s included
The kit includes all components, the bushings, the hardware and step by step instructions.










