Overview
The Hellwig 7712 is a front sway bar for the 2011–2016 Ford F-250 Super Duty and F-350 Super Duty. It has a front mounting location, a single spring rate and a direct-fit design, and it comes with poly bushings.
It fits King Ranch, Lariat, Platinum, XL and XLT trims of both trucks.
Key features
- Front mounting location
- Single spring rate
- Poly bushings included
- Direct-fit design for the listed Super Duty trims
- Its type is automatic.
Maintaining the front bar
Poly bushings are firmer than rubber, which helps the bar hold its position under load. That firmness can transmit more noise and vibration, and it can squeak if the contact surfaces run dry. Keeping the bushings lubricated and checking the bar’s brackets and bolts at regular service intervals helps the front end stay quiet and controlled.
Front sway bars on heavy-duty trucks work hard when towing or carrying loads, so inspect the end links and mounting hardware after rough use. Look for loose nuts, cracked bushings and worn link ends. Address any movement early, since small looseness often grows into a larger problem.
- Lubricate poly bushings during installation
- Re-check bracket bolts after the first drives
- Inspect end links after towing
Specifications
| Brand | Hellwig |
|---|---|
| Part number | 7712 |
| UPC | 745662077129 |
| Mounting location | Front |
| Spring rate | Single rate |
| Bushings | Poly |
| Fitment type | Direct fit |
| Type | Automatic |
Vehicle fitment
It fits the 2011–2016 Ford F-250 Super Duty and F-350 Super Duty, in King Ranch, Lariat, Platinum, XL and XLT trims.
Model years 2010 and earlier and 2017 and later are not in the list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Poly bushings come with the bar. Check the remaining hardware against your installation before starting.









