Overview
The RockJock CE-9902-18 is a universal Antirock sway bar kit for custom rigs and rock buggies. It has a 45-inch torsion bar and 18-inch fabricated steel arms. These kits are intended for builders making their own rigs, and they require fabrication for installation, so they are not bolt-on kits.
Vertical links use a 14-inch threaded rod with 1/2-20 thread that can be cut to length. The kit includes 1/2-inch heim joint rod ends, jam nuts and tabs to weld to the axle tube. A universal weld-in DOM tube, 1.75-inch by .095 wall, is supplied and must be cut to suit the torsion bar length. Delrin bushings support the bar inside the tube. The bar diameter is .800 for the 45-inch torsion bar.
Key features
- 45-inch torsion bar with a .800 diameter
- 18-inch fabricated steel arms
- 14-inch threaded rod for vertical links, cut to length
- Heim joint rod ends, jam nuts and axle tabs supplied
- 1.75-inch DOM weld-in tube with Delrin bushings
Planning a weld-in build
Weld-in sway bar systems give the builder control over arm position, bar placement and link geometry, which is why they suit custom rigs. The axle tube and frame must be prepared before welding, and the tabs should be fitted and checked for alignment before the final weld. Measure twice, because a tube cut too short cannot be lengthened without new material.
Delrin bushings reduce friction inside the tube but still wear over time, so check them whenever the bar is removed for service. Cut-to-length links need clean threads and secure jam nuts, and heim joints should be greased or inspected for play. Plan for a grinder, welder and drilling tools before starting, and inspect the welds once the rig has been driven over rough terrain.
- Dry fit the tabs before welding
- Clean threads before cutting the rod
- Grease heim joints on a regular schedule
- Inspect welds after the first rough run
Specifications
| Brand | RockJock 4×4 |
|---|---|
| Part number | CE-9902-18 |
| Product type | Universal Antirock sway bar kit |
| Torsion bar | 45 inches, .800 diameter |
| Arms | 18-inch fabricated steel |
| Vertical links | 14-inch threaded rod, 1/2-20 thread, cut to length |
| Tube | 1.75-inch DOM, .095 wall, weld-in |
| Bushings | Delrin |
| Installation | Fabrication required, not bolt-on |
| Fitment type | Universal fit |
Vehicle fitment
No vehicle is named for this kit. It is a universal fit, and the parts are cut and welded to suit a custom build, so no truck is tied to the kit.
Because the kit is a vehicle-sized suspension part that must be fabricated, universal fit does not confirm that it suits any particular truck. Confirm the application with RockJock before fitting.
Installation notes
The tube must be cut to length to work with the torsion bar, and the tabs are welded to the axle tube. These kits are not bolt-on.
What’s included
The kit includes the 45-inch torsion bar, 18-inch arms, the 14-inch threaded rod, heim joint rod ends, jam nuts, axle tabs, the weld-in DOM tube and Delrin bushings.









