Overview
The Rock Hard 4×4 Parts RH-5041 is a Patriot Series stubby front bumper for the 2007–2016 Jeep Wrangler JK, in 2-door and 4-door versions. It is a grille-width bumper laser cut from 1/4 inch aluminum, finished in black powder coat, with a total weight of 35 pounds versus 102 pounds for the steel version.
The bumper mounts directly to the frame horns and installs in minutes. Winches sit on top of the frame rails through pre-drilled holes, so trimming is not needed. Standard features include laser cut Hi-Lift jack recovery points, double welded recovery shackle tabs, light mounting tabs, OEM fog light compatibility and pre-drilled winch mounting holes. The narrower grille-width design gives higher side clearance.
The grille-width design suits trails where a narrower bumper and extra side clearance matter more than full-width coverage.
Key features
- Laser cut 1/4 inch plate aluminum
- Total weight of 35 pounds versus 102 pounds for the steel version
- Grille-width stubby design with high side clearance
- Winch mounts on top of the frame rails, with pre-drilled mounting holes
- Laser cut Hi-Lift jack recovery points
- Double welded recovery shackle tabs; D-ring shackle mounts included
- Light mounting tabs and OEM fog light compatibility
- Powder coated in house, made in the U.S.A.
Weight and durability trade-offs
Aluminum bumpers reduce the weight carried at the front of the Jeep, which can help with steering response and suspension load compared with a heavier steel bumper. Aluminum tends to dent rather than deform in the same way steel does, so inspect bends and cracks after hard contact with rocks. Powder coat helps protect the surface, but scratches should be touched up to keep corrosion away from exposed metal.
Weight savings matter most when the bumper is loaded with a winch and accessories, since those add to the front end. Check the frame horns for rust before installation, and confirm that the winch, lights and shackles chosen will fit the top-mounted plate. Re-tighten fasteners after the first few trail runs and recheck the recovery shackle tabs for cracks.
Specifications
| Brand | Rock Hard 4×4 Parts |
|---|---|
| Part number | RH-5041 |
| UPC | 700007274211 |
| Series | Patriot |
| Position | Front |
| Width | Stubby (grille width) |
| Material | Aluminum, 1/4 inch plate |
| Finish | Black powder coat |
| Weight | 35 pounds (steel version: 102 pounds) |
| Winch mount | Included, pre-drilled, on top of the frame rails |
| Light mounts | Included |
| D-ring mount | Included |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2007–2016 Jeep Wrangler JK, in 2-door and 4-door versions.
Fit is limited to the JK model years above. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The bumper mounts straight to the frame horns and installs in minutes. Winches mount on top of the frame rails through pre-drilled holes, with no trimming required.
What’s included
- Stubby front bumper
- Winch mounting holes
- D-ring shackle mounts
- Light mounting tabs
Not included: Winch, lights and shackles.
























