Overview
The Rigid Industries SR2-Series Single Row Driving LED Light, part number 910622, is a low-profile single row LED light bar. It is used for on and off-road racing, police and fire rescue vehicles and marine applications, and it comes in a range of lengths and configurations. The SR-Series is the low-profile option in the Rigid lineup, and the E-Series is its flagship light.
The bar projects light at long distances while drawing little power. Its extruded aluminum housing and polycarbonate lens are sealed against the elements, and the lens is designed to resist breakage.
The two-piece housing is built to be stronger and more durable than earlier versions, with an improved cooling system and extra mounting bosses on the bottom.
Key features
- Single row low-profile LED light bar
- Extruded aluminum housing
- Polycarbonate lens sealed against the elements
- Two-piece housing with improved cooling
- Extra mounting bosses on the bottom of the housing
- Integrated Deutsch/AMP plug
Choosing a mounting position
Mounting position shapes how a light bar performs. A bar set high and centered throws light farther down the trail, while a bar mounted lower on a bumper or grille gives a wider spread close to the vehicle. Before drilling, hold the bar in place with the vehicle on level ground and angle it to see where the beam lands, so it does not sit in the eyes of oncoming drivers when used on public roads.
Clearance matters as much as angle. Check the hood opening, windshield wipers and any roof rack before choosing a spot, and leave slack in the wiring so the harness reaches the fused relay without strain. Light bars take a steady beating from washboard roads and branches, so inspect brackets and hardware after the first few runs and re-tighten as needed.
- Measure the mounting surface before buying brackets
- Route wiring away from moving parts and sharp edges
- Re-check fasteners after rough trail use
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 910622 |
| UPC | 849774011344 |
| Series | SR2 single row |
| Light type | LED |
| Housing | Extruded aluminum, two-piece |
| Lens | Polycarbonate |
| Connector | Integrated Deutsch/AMP plug |
| Mounting hardware | User serviceable |
| Application | Universal |
Vehicle fitment
It is a universal fit and is not tied to a specific vehicle. Plan the mounting location before ordering, since the bar mounts with user serviceable hardware.
Installation notes
Wire the light through a fused relay, and check your local rules, since off-road light bars may not be legal for use on public roads in every area.
What’s included
The SR2-Series light bar with user serviceable mounting hardware. Check the package contents against your installation before starting.









