Overview
The Rigid Industries SR-Q Single Row 10 degree spot LED light, part number 905213, is a low-profile auxiliary light with a tight spot beam pattern. It is universal fit, so it is not designed for one vehicle and mounts wherever the space works for the application.
The SR-Q PRO has improved LEDs inside the body for more output than earlier versions. It has updated RIGID branding and blacked out circuit boards, and it offers several mounting paths, including a suction cup mount. A back-up light kit version is also available with a harness and switch for wiring convenience.
Key features
- Tight 10 degree spot beam pattern
- Low-profile single row of LEDs
- More output than earlier models, depending on optic.
- Blacked out circuit boards and updated RIGID branding
- Mounting choices: surface, flush, suction cup and angled flush
- Clear lens with LED bulb type
Aiming a spot beam
A 10 degree spot concentrates light into a tight beam, so small changes in aim shift the lit area a long way. Set the angle with the vehicle parked on level ground, marking a target at a set distance before tightening. Surface, flush, suction cup and angled mounts each hold angle differently, so retest after mounting to confirm the spot lands where you need it.
Suction cup mounts suit temporary placement, but they can slip under vibration and should be checked often. Flush mounts need a clean, suitable opening and sealing around the housing edge. Keep the wire away from hot surfaces and moving parts, and use a fused relay so the switch carries a light load. A dirty or fogged clear lens will cut the spot’s reach, so keep it clean.
- Test the aim before final tightening
- Clean the lens before each trip
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 905213 |
| UPC | 849774028007 |
| Lens color | Clear |
| Bulb type | LED |
| Beam pattern | Spot, 10 degree |
| Light output | Up to 102% more raw lumens, depending on optic (per Rigid) |
| Mounting type | Universal |
| Size | 0 to 10 in |
| Sold as | Single |
| Fitment | Universal fit |
Vehicle fitment
This single row 10 degree spot light is universal fit, so no particular year, make or model applies. Choose the mount type that suits your vehicle or equipment.
Vehicle-specific fitment is not published for part 905213. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Aim matters with a spot beam, so set the mounting angle before tightening anything. Flush mounts need a suitable panel opening, and the wiring should be routed away from moving parts.
What’s included
Sold as a single light with the mounting options described above.
Not included: The harness and three-position switch belong to the Back-Up Light Kit version, so they are not part of this single light.









