Overview
The Rigid Industries 922523 is an SR-M series diffused flood LED light with a 20 degree flood pattern, a clear square lens and a flush mount. It comes as a single light and is marked universal fit, so it is not tied to one vehicle.
The optics use patented hybrid optics. The LED is rated at 50000 plus hours and turns on and off instantly with no warm-up. It has over and under voltage protection and a GORE pressure equalizing vent, and it is designed, engineered and assembled in the USA.
Key features
- 20 degree flood pattern from patented hybrid optics
- 50000 plus hour LED lifespan
- Instant on and off with no warm-up
- Over and under voltage protection
- Integrated thermal management and a GORE pressure equalizing vent
- Cast aluminum housing with a durable polycarbonate lens
Flush mounts and cutouts
A flush mount sits level with the surface it is fitted to, which keeps the profile low and reduces the chance of snagging branches or gear. The trade-off is that the cutout must match the housing closely, so measure carefully and fit a gasket or sealant that keeps water out. Test the fit with the light held in place before cutting through the final material.
Flush lights are often fitted into bumpers, roof panels or light bars, and each location has its own clearance and heat concerns. Keep wiring clear of moving parts and sharp edges, and use grommets where cables pass through panels. Inspect the seal after the first few rough runs, since water entering the housing is a common cause of early failure.
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 922523 |
| UPC | 849774017117 |
| Flood pattern | 20 degree |
| Light shape | Square |
| Lens color | Clear |
| Bulb type | LED |
| Mounting type | Flush |
| Size | 0 to 10 inch |
| Lifespan | 50000 plus hour |
| Housing | Cast aluminum |
| Lens | Durable polycarbonate |
| Package | Single light |
| Fitment | Universal fit |
Vehicle fitment
Universal fit means no vehicle is named for this flood light. Check that the flush mount opening suits the 0 to 10 inch size range before choosing a location.
Year, make, model and trim compatibility cannot be confirmed for this flood light, so check your vehicle before ordering.
Installation notes
A flush mount needs a cutout sized to the housing, so measure the opening before cutting. Route the power through a fuse and relay, and check local rules on auxiliary lighting before using it on a road vehicle.
What’s included
One flush mount flood light comes as a single unit.
Not included: Wiring, switch and mounting hardware are not included. Confirm you have these before starting the installation.









