Overview
The Rigid Industries A-Series LED accessory light, part 480133, is a universal-fit LED lamp with an aluminum housing. It is intended for cabs, boat cabins, work vehicle beds, trunks and under-hood areas.
The housing is durable and compact. The lamp is waterproof and lightweight, and the A-Series comes in several LED colors and in high and low power versions.
Key features
- Universal fit for vehicles and marine cabins
- Durable compact aluminum housing
- Waterproof, lightweight design
- LED color and high or low power choices
- Adapters for flat or tube mounting
Mounting on tough surfaces
Vehicles and boats throw a lot at mounted lights: road spray, washing, vibration and sun. Adhesive pads work well on smooth, clean surfaces but can fail on textured or oily ones, so the mount needs careful prep. Rubber flat-mounts add a little flex, which can help where a rigid bracket might crack the surrounding panel.
For a boat cabin, fasteners and bedding should be sealed to keep water out of drilled holes. For a truck or SUV, check the back of the panel before drilling, and use backing plates where the sheet metal is thin. Recheck every mount after the first few trips and after any washing with a pressure washer, since loose mounts are the usual cause of rattles.
- Clean the surface with a solvent before bonding
- Use backing plates on thin sheet metal
- Seal drilled holes in marine installs
- Recheck mounts after the first few trips
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 480133 |
| UPC | 849774018466 |
| Housing | Durable compact aluminum |
| Construction | Waterproof, lightweight |
| LED options | Variety of LED colors; high and low power versions |
| Mounts | Rubber flat-mount, 3M VHB two-way pad, radius tube-mount adapters |
| Wire exit | Side or bottom, through the tube adapter |
Vehicle fitment
It is a universal fit lamp, so it is not matched to one vehicle. The mounting surface and wire route decide where it works.
Check the flat face or tube bracket you plan to use before mounting. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Two routes exist: the 3M VHB two-way pad or rubber flat-mount for flat faces, and the radius tube-mount for angled side or bottom wiring. Put a fuse in the power feed and follow local rules for auxiliary lights.
What’s included
Each unit comes with a rubber flat-mount, a 3M VHB two-way pad and radius tube-mount adapters.
Not included: A power feed, switch and fuse are not included, so plan to supply them.









