Overview
The Rigid Industries D-Series Dually Rear Facing Dual Function LED Lights, part number 90151, are a kit of amber LED lights designed to face rearward. Each light has a high and a low output, so the same light can serve as a running light at low power and as a brake light at full power.
The three-position rocker switch lets the driver choose High, Low or Off. High runs at full intensity, and Low runs at 20 percent intensity. The lights use an oversized heat sink for cooling and have a rated lifespan of 50,000 hours. A three-wire harness is needed for the dual function, and the switch selects which mode is active.
Rigid’s dual function design is meant for conditions that change during a trip. A driver can run the lights at low power in most driving and step up to full power when the light is needed as a brake signal.
Key features
- Dual function: high for a brake light, low for a running light
- Three-position rocker switch with High, Low and Off
- Low mode at 20 percent intensity
- Oversized heat sink for cooling
- 50,000-hour rated life.
- Amber lens in a square housing
Wiring brake and running functions
A dual-function light changes role with the switch, so wiring should separate the brake and running circuits cleanly. Connect the high setting to the brake circuit and the low setting to the running circuit, and fuse each path. Test each mode while the vehicle is parked before relying on it on the trail or the road.
The amber lens and dark housing are built for daily use, but rear-mounted lights take rain, mud and road salt. Keep the surface clean and the cable protected from heat and abrasion. Rear lighting rules vary, so check local requirements for color and function before fitting the kit to a road-going vehicle.
- Connect high to the brake circuit, low to running
- Fuse each path separately
- Test every mode while parked
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | RIG90151 |
| Series | D-Series Dually Rear Facing Dual Function |
| Sold as | Kit |
| Light shape | Square |
| Housing length | 2 inch |
| Lens color | Amber |
| Beam pattern | Combo |
| Mounting | Surface |
| Finish | Black |
| Wiring | Three-wire harness |
| Control | Three-position rocker switch: High, Low, Off |
| Rated life | 50,000 hours |
Vehicle fitment
These rear-facing lights are a universal fit, so they are not built for one vehicle. They mount on the surface at the rear of the vehicle, and the owner picks the location. The high and low modes are meant to be wired to the brake and running circuits.
Installation notes
Use the three-wire harness so the switch can select high and low. Surface mounting needs a clean mounting spot and a protected cable route. Rear-facing brake and running lights are regulated in many places, so check local rules before wiring them to a road vehicle.
What’s included
The kit includes two rear-facing LED lights, the three-position rocker switch and the three-wire harness. Confirm you have the mounting hardware you need before starting the install.









