Overview
The Rigid Industries D-Series PRO SAE Fog Light Kit (White), part number 504815, is an SAE compliant fog light kit for dust, fog and other low-visibility conditions. It is legal for use on the street.
The lights draw 1.5 amps at 22 watts and produce 1760 lumens. They are rated for up to 50,000 useful hours and meet SAE J583.
Key features
- SAE compliant for low-visibility conditions
- SAE J583 compliant for street use
- 22 watts
- 1.5 amps draw
- 1760 lumens
- Up to 50,000 useful hours
Relay and switch sizing
Fog lights that draw more than a few amps should be run through a relay, so the dash switch only carries a small control current. Size the fuse to the total draw of the pair, not one light, and keep the feed short to limit voltage drop. Route the wiring so it stays clear of the exhaust and suspension travel.
SAE rated lights are built for low-visibility use, but a clear lens still needs regular attention. Wash off mud and salt after trips, and inspect the seal around the housing for cracks. Check the aim after the first few trail outings, since vibration can move the bracket. A quick look at the connector every few months catches corrosion early.
- Fuse the pair to its total draw
- Keep the feed short
- Inspect the seal after washing
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 504815 |
| Series | D-Series |
| Light color | White |
| Beam pattern | SAE |
| Watts | 22 |
| Amps | 1.5 |
| Lumens | 1760 |
| Fitment | Universal fit |
Vehicle fitment
Universal fit. The D-Series PRO lights are not tied to a vehicle, so the mounting spot and the wiring decide where they go.
Check the mounting location and the wiring before ordering.
Installation notes
Size the relay and switch for the 1.5 amp draw per light, and aim the lights low for fog use after mounting.
What’s included
One D-Series PRO SAE white fog light kit.









