Overview
Part number 83451 is the R-Series 46 Marine LED Light, a circular light with a curved lens and curved housing. It carries UPC 849774011108 and is universal fit, so it is set up by mounting and use rather than by vehicle.
The light suits spotlight use, fog light positions and situations that need strong output. Its compact body and heat sink are part of the design. Confirm the beam pattern for this part number before choosing it.
Key features
- Circular body with curved lens and curved housing
- Compact design with advanced heat sink
- Spot, Hyperspot, Flood, Combo, Driving and Wide beam options across the series
- Marine LED light category
Planning a marine LED install
A marine light lives in a harsh place, so the install plan matters as much as the light. Choose a mounting spot that keeps the lens out of direct wave spray and away from the boat’s rigging. A fused circuit, a relay and a switch that can be reached from the helm make the setup easier to manage and to troubleshoot later.
Connections are where most marine lighting problems start. Use connectors rated for wet locations, keep the wire runs away from moving parts and check the insulation at each season change. After the first trips, inspect the mounting, the lens and the cable entry points for signs of chafing or water getting in.
- Pick a mounting spot away from direct spray
- Use connectors rated for wet locations
- Inspect cable entry points each season
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 83451 |
| UPC | 849774011108 |
| Series | R-Series 46 |
| Type | Marine LED light |
| Fitment | Universal Fit |
Vehicle fitment
No year, make or model is named for this light. Universal fitment means it is set up by mounting and use, not by a vehicle chassis.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Wire the light through a fused circuit, using a relay for high-output LEDs. Follow local rules for marine lighting before you install it.
What’s included
Check the package contents against your installation before starting, and plan mounting hardware and wiring separately.














