Overview
The A-Series from Rigid Industries, part number 480243, is an LED accessory light that Rigid positions as universal. It can be mounted in vehicle cabs, boat cabins, work vehicle beds, under a hood or inside a trunk.
The aluminum housing is compact and durable. The light is waterproof and lightweight, and Rigid offers the A-Series in various LED colors and in high and low power versions.
Key features
- Universal application across vehicles and boats
- Compact, durable aluminum housing
- Waterproof and lightweight body
- Choice of LED colors and power levels
- Side or bottom wire exit through the tube adapter
Wiring and mounting basics
Any auxiliary light depends on a clean power feed. Route the wire away from moving parts, sharp edges and heat sources, and secure it with clips so it does not chafe. A fused circuit protects the wiring if a fault occurs, and a switch lets you turn the light on only when needed. Use weatherproof connectors wherever the wire faces road spray or water.
Mounting surfaces matter as much as the light itself. A flat panel holds a 3M VHB pad best when it is clean, dry and free of wax or oil, so take a few minutes to wipe the spot before applying it. When a tube adapter is used, check that the light clears doors, hoods and cargo, and that the angle does not throw glare into oncoming traffic.
Inspect the installation periodically. Look for loose mounts, cracked lenses, corrosion on terminals and any dimming that suggests a poor connection. Tighten fasteners and clean contacts when needed, and replace damaged wiring before it becomes a short.
- Clean and dry the mounting surface before applying tape
- Route wire with clips away from heat and moving parts
- Re-check mounts after rough trail or road use
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 480243 |
| UPC | 849774018572 |
| Housing | Durable compact aluminum |
| Construction | Waterproof, lightweight |
| LED options | Various colors; high and low power versions |
| Mounting | Rubber flat-mount, 3M VHB two-way pad, radius tube-mount adapters |
Vehicle fitment
Rigid’s listing is universal, so no single vehicle is tied to part 480243. Your chosen mounting point is what determines suitability.
Check the surface you plan to use before mounting, including space for the wire. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount with the rubber flat-mount or 3M VHB two-way pad on flat surfaces. Use the tube-mount adapter when you need a side or bottom wire route. Fuse the power circuit and confirm local road-use rules.
What’s included
Rubber flat-mount, 3M VHB two-way pad for flat mounting, and radius tube-mount adapters.
Not included: Power wiring is not included with this part, so source it separately and check it against your installation before starting.









