Overview
The Rigid Industries A-Series LED Light, part number 480033, is a waterproof accessory light for places that are otherwise dark, such as a boat cabin, a work vehicle bed or the area under a hood. It is a universal light that can be used in many locations.
A compact aluminum body keeps the light durable without adding much size. Flat mounting uses a rubber pad or a 3M VHB 2 way pad, and radius tube-mount adapters allow side or bottom wire exits. The series is lightweight and comes in several LED colors and high or low power versions.
Key features
- Compact aluminum housing
- Waterproof and lightweight
- Rubber flat-mount and 3M VHB 2 way pad included
- Radius tube-mount adapters with side or bottom wire exits
- Multiple LED colors and power versions across the series
- Universal fit
Where accessory lights earn their place
Accessory lights in cabs, beds, trunks and boat cabins are often used for work tasks, such as finding a tool or checking a connection in the dark. Plan the spot so the light covers the working area without shining into the eyes of the driver. Keep the housing away from heat sources, and confirm there is clearance for the adapter before drilling or adhering.
Lightweight lights can be moved to new spots as needs change, so keep spare mounts and a few cable ties on hand. Inspect the housing seal periodically, since waterproofing depends on an intact seal, and replace the gasket if it cracks or flattens.
- Aim away from the driver’s eyes
- Check adapter clearance before mounting
- Inspect the housing seal regularly
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 480033 |
| UPC | 849774018367 |
| Light type | LED accessory light |
| Housing | Compact aluminum |
| Water resistance | Waterproof |
| Mounting options | Rubber flat-mount, 3M VHB 2 way pad, radius tube-mount adapters |
| Wire exit | Side or bottom |
| Fitment | Universal Fit |
Vehicle fitment
It is universal fit and is not built for a particular vehicle, so the mounting spot and wire route are chosen during installation.
Because the light is not vehicle-specific, confirm that your chosen surface and wire path have room for the housing and adapter.
Installation notes
Start by choosing the wire exit, side or bottom, using the radius tube-mount adapter. Use the rubber flat-mount or the 3M VHB 2 way pad for a flat position. Protect the wiring where it passes through the body, and run it through a fused switch circuit.
What’s included
Included are the rubber flat-mount, the 3M VHB 2 way pad and the radius tube-mount adapters.
Not included: Plan the wiring, a switch and a fuse before installation, since they are not included with the light.









