Overview
The Rigid Industries E-Series 10 Deg. Spot LED Light, part number 106213, is an LED light bar that concentrates its light into a narrow 10 degree spot beam. Spot optics throw a tight pattern, so this bar suits jobs that need light focused on one area rather than spread wide.
It is a rectangular bar with a clear lens, offered with surface or bracket mounting and listed at 6 inch with a 0 to 10 inch range. Rigid positions the E-Series for off-road, power sports, marine, general automotive and first responder use. This spot version carries a universal fit designation, so the vehicle match depends on mounting position, aim and wiring rather than a model list.
Key features
- Narrow 10 degree spot pattern for a focused beam
- Rectangular LED bar with a clear lens
- Surface or bracket mounting, listed at 6 inch with a 0 to 10 inch range
- Spot is one of the E-Series beam options alongside Flood, Driving, Hyperspot and Diffused
- Rigid says recent E-Series PRO LED upgrades deliver up to 111% more raw lumens
Aiming and setup
A narrow spot beam is only as useful as its aim. Set the bar in its final position, then adjust the angle with the beam pointed at a fixed target such as a trail marker or a road sign. Small changes in tilt move the hot spot a long way down the path, so take time to fine-tune it after the bolts are snug.
Plan the power run before the bar is fixed in place. A fused relay keeps the switch small and protects the wire if the bar is shorted by debris. Keep the cable away from sharp edges and hot exhaust components, and secure it with clips so it does not sag into moving parts. Re-check the aim after rough trail sections, because bumps can shift a bracket.
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 106213 |
| UPC | 849774028892 |
| Type | Spot |
| Beam | 10 degree spot |
| Light shape | Rectangular |
| Bulb type | LED |
| Lens color | Clear |
| Mounting type | Surface or bracket |
| Size | 6 inch; listed range 0 to 10 inch |
| Sold as | Single |
| Fitment | Universal fit |
Vehicle fitment
This spot bar is universal fit and names no vehicle. Pick a mounting point that gives the bar clearance and lets you aim the narrow beam where you need it.
A spot pattern is sensitive to angle, so set the aim after the bar is fixed in place rather than trusting the first position you pick.
Installation notes
Power the bar through a switch and a fused relay. Aim it after mounting, and check local rules for auxiliary lights before using it on a vehicle driven on public roads.
What’s included
One E-Series 10 Deg. Spot LED light bar, sold as a single unit.
Not included: no power wiring, switch, fuse or mounting hardware is named with this bar.









