Overview
It is a 20-inch surface-mount LED light bar with a combo beam: a 10 degree spot and a 20 degree flood. It is universal fit, so it is not built for one vehicle.
The light has a black rectangular housing with 40 white LEDs and a hybrid optic. It is engineered and assembled in the USA, with a polycarbonate lens and integrated thermal management.
Key features
- Patented hybrid optics with a 10 degree spot pattern
- Combo beam: 10 degree spot and 20 degree flood
- 50000-plus hour LED lifespan
- Instant on and off with no warm-up
- Over and under voltage protection
- Durable polycarbonate lens with integrated thermal management and a GORE pressure equalizing vent
- Engineered and assembled in the USA
Wiring and beam aiming
A light bar with a combo beam gives a spot pattern for distance and a flood pattern for near field. Aim the bar so the spot sits ahead of the vehicle at the height you expect to drive, and set the flood so the near area is lit without glare to oncoming drivers. Test the aim on a level surface before a night trip.
Light bars draw meaningful current, so the wiring needs a fuse close to the power source and a relay that carries the load away from the switch. Use wire sized for the run and route it away from heat, moving parts and sharp edges. Keep the ground connection clean and tight on bare metal.
Clean the lens regularly, since road film and mud reduce output. Inspect the bracket bolts and the housing seal after rough trips. A dim or flickering bar often points to a loose connection or a fault in the power supply rather than the LEDs.
- Aim the spot ahead at driving height
- Fuse close to the power source
- Clean the lens and check the bracket after rough trips
Specifications
| Brand | Rigid Industries |
|---|---|
| UPC | 849774028984 |
| Light type | LED light bar |
| Length | 20 inches |
| LEDs | 40 white |
| Housing | Black rectangular |
| Lens | Clear polycarbonate |
| Beam | 10 degree spot / 20 degree flood combo |
| Mounting | Surface, bracket |
| Lifespan | 50000-plus hours |
| Fitment | Universal fit |
Vehicle fitment
Because it is a surface-mount bar, the 20-inch length and bracket mount decide where it fits, not a vehicle model.
Confirm the mounting surface and clearance on your vehicle before installing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Wire the light through a fuse and a relay, and check local rules on auxiliary driving lights before using them on public roads.
What’s included
The light is mounted with a surface mount bracket.
Not included: Wiring and a fuse are needed for installation, so have them ready before starting.









