Overview
The Rigid Industries A-Series LED Light, part number 482113, is a universal accessory light made for quick added brightness in dark spaces. Rigid names vehicle cabs, boat cabins, work vehicle beds, under-hood spaces and trunks as typical places to use it.
The compact aluminum housing is durable, and the light is lightweight and waterproof. It is available in several LED colors, each in high or low power. The three mounting routes are a rubber flat-mount, a 3M VHB two-way pad, and radius tube-mount adapters that deliver the wire from the side or the bottom.
Key features
- Compact aluminum housing, durable build
- Lightweight and waterproof
- Several LED color options
- High and low power versions
- Rubber flat-mount and 3M VHB 2 way pad for flat mounting
- Radius tube-mount adapters for side or bottom wire exits
Choosing a mounting position
Start by deciding what the light needs to show. A position on a cab roof or a cargo deck gives a wide area of light, while a spot under a hood or inside a trunk lights a narrower work zone. Consider glare to the driver, reflection from glass, and whether the beam will fall on the ground where you need it. Mock up the position with the mount before drilling or applying adhesive.
Surface preparation makes a difference. Adhesive pads need a clean, dry, flat area, and many surfaces take better with a light scuff and cleaning. Where the flat mount is used, check that the fasteners will not hit wiring or a fuel line behind the panel.
- Consider glare and reflections from glass
- Mock up the position before drilling
- Check behind the panel for wiring and lines
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 482113 |
| UPC | 849774018794 |
| Product type | A-Series LED accessory light |
| Housing | Compact aluminum |
| Power versions | High and low |
| Mounting | Rubber flat-mount, 3M VHB 2 way pad, radius tube-mount adapters |
| Wire exit | Side or bottom |
| Fitment | Universal Fit |
Vehicle fitment
The 482113 is a universal accessory and is not designed for a particular vehicle. Where it fits comes down to the chosen mounting surface, the space available and the route for the cable.
Test the mounting position before committing to adhesive. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount it with the rubber flat-mount or the 3M VHB pad on a flat surface, or use the radius tube-mount adapters to bring the wire out the side or bottom. Clean the surface before setting the adhesive pad. Add a fuse close to the power source and keep the wire clear of moving parts.
What’s included
Included are a rubber flat-mount, a 3M VHB 2 way pad for flat mounting and radius tube-mount adapters that give side or bottom wire exits.
Not included: Check the wiring and switch needs against your installation before starting.









