Overview
The Revtek drop pitman arm P-500 (REVP-500) is a 4-inch drop pitman arm for 1999-2004 Ford F-250 and F-350 Super Duty trucks with power steering, and the 1999 F-250.
Revtek says drop pitman arms bring steering geometry back in line after a lift has been installed, for safer and nicer driving. The arm mounts in the front position.
The arm corrects steering geometry that a lift has altered.
Key features
- 4-inch drop
- Corrects steering geometry after a lift
- For power steering
- Front position
- Direct-fit
Alignment after a lift
Lifting a truck changes the angles that the steering linkage works through, so the wheels can react differently at the center and at full lock. A drop pitman arm changes the position of the link that the steering box moves, which is why it is often fitted with a lift. After installation, check the steering centering, the wheel toe and any wander on the road, since the new geometry may need a full alignment.
Steering parts wear faster on a lifted truck, so inspect the tie rod ends, ball joints and the steering box for play during routine service. Look for loose wander, clunks over bumps or uneven tire wear. Keep the pitman arm nut torque and the steering box mounting secure, and recheck them after the first few drives.
- Check steering centering after the first drive
- Inspect tie rod ends and ball joints for play
- Schedule an alignment after any lift or steering change
Specifications
| Brand | Revtek |
|---|---|
| Part number | REVP-500 |
| Amount of drop | 4 inches |
| Position | Front |
| Steering type | Power steering |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1999 Ford F-250 and the 1999-2004 Ford F-250 Super Duty and F-350 Super Duty, in trims including XL, XLT, Lariat and King Ranch.
Later Super Duty generations are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Since the arm restores geometry after lifting, check alignment and steering response after installation.









