Overview
The Fabtech FTS311 is a 4-inch drop pitman arm with 36 splines for 1999–2004 Ford F-250 and F-350 Super Duty trucks. The arm is offset and is made for power steering.
Fabtech explains that dropped pitman arms are required in many of its suspension kits to restore steering geometry after a lift, and builds them from forgings finished with CNC machining so they are stronger than the stock arm.
Key features
- 4-inch drop for restoring steering geometry
- 36-spline count
- Offset design
- Power steering application
- Forged and CNC machined by Fabtech
Steering geometry after a lift
A pitman arm connects the steering box to the drag link, and its angle sets how the front steering moves. When a truck is lifted, the drag link angle changes, which can cause bump steer, wander and uneven steering feel. A dropped arm moves the connection point so the geometry is closer to the factory layout, which is why it is often installed with a lift.
Check the steering box spline count against the arm before fitting, since the splines must match the box for the arm to seat correctly. Tighten the nut to the correct torque and use a new cotter pin or lock nut, then inspect the drag link, tie rods and steering box for play. Have the alignment checked after the job, and re-check the nut after the first few drives.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS311 |
| Amount of drop | 4 inches |
| Spline count | 36 |
| Design | Offset |
| Steering type | Power steering |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1999–2004 Ford F-250 Super Duty and 1999–2004 F-350 Super Duty in King Ranch, Lariat, XL, XLT and Harley-Davidson Edition models.
Only 1999–2004 Super Duty trucks are listed, and the arm has 36 splines, so check the spline count of your steering box before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pitman arms are normally installed as part of a lift kit. After the arm is fitted, have the steering geometry and alignment checked, since the drop is there to correct the geometry changed by the lift.










