Select your vehicle

Revtek 3 Inch Lift Kit – 442

Revtek

Shop Toyota Sequoia Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 3-inch front and 2.5-inch rear lift for 2008–2017 Toyota Sequoia Limited, Platinum and SR5 models
  • Coil spring spacers at the front; split spacer design
  • Clears tires up to 35 inches.
  • No cutting, welding or change to factory steering geometry

Description

Overview

The Revtek 442 is a 3-inch front and 2.5-inch rear lift kit for the 2008 to 2017 Toyota Sequoia. It fits Limited, Platinum and SR5 models. The kit is sized around 33×12.5-inch tires and clears tires up to 35 inches.

Revtek’s Toyota suspension systems use a split spacer design. The installation needs no cutting or welding and leaves factory steering geometry unchanged. The front lift comes from coil spring spacers, and the lift is designed not to change ride quality.

Key features

  • 3-inch front lift from coil spring spacers
  • 2.5-inch rear lift
  • Split spacer design
  • Clears tires up to 35 inches.
  • No cutting or welding required
  • No modification to factory steering geometry.

Before you buy

A spacer lift raises the truck without changing the factory control arms or axles, which keeps the install simpler than a full long-arm setup. The front coil spacers raise the body, but steering and suspension geometry still need to be verified after a lift this size. Plan for a new alignment, a look at the driveline angles, and a check of the brake lines and sensor wires for stretch as the wheels move.

Tire choice matters just as much. Larger tires add weight and change gearing, so pick a size that clears the fenders on your truck rather than the largest one that could fit. Rubbing at full steering lock is common at the upper end of the range, so test clearance by turning the wheels both ways after installation.

  • Schedule an alignment right after the install
  • Check brake lines and wiring for tension
  • Test tire clearance at full steering lock

Specifications

Brand Revtek
Part number 442
Front lift 3 inches, coil spring spacers
Rear lift 2.5 inches
Tire size 33×12.5 inches
Tire clearance Up to 35 inches
Installation No cutting or welding
Fitment type Direct fit

Vehicle fitment

It is a direct fit for 2008 to 2017 Toyota Sequoia models in the Limited, Platinum and SR5 versions.

This kit covers 2008 to 2017 Sequoia models only. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The kit needs no cutting or welding. The front coil spring spacers change front height, so check the alignment after installation and check driveline angles at the new rear height.

What’s included

The package includes front coil spring spacers and rear lift components. Check the contents against the title number before installing.

SKU: REV442 Categories: ,

Fitment

VehicleYearsTrims
Toyota Sequoia2008–2017Limited, Platinum, SR5

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will this kit fit a 2018 Sequoia?

No. This kit is made for 2008 through 2017 Sequoia models, so a 2018 or newer truck falls outside its coverage. Confirm your vehicle's year, model and trim before ordering, since the Sequoia lineup varies by version.

What tire size does the Revtek 442 allow?

A 33x12.5-inch tire is the size this kit is sized around, and it clears tires up to 35 inches. Check fender clearance on the vehicle after installation, especially at full suspension travel.

Does installation need cutting or welding?

No. The kit needs no cutting or welding, and the installation keeps factory steering geometry unchanged. Plan on an alignment check afterward, since the front spacers change front height, and confirm driveline angles at the new rear height.

Do spacer lifts affect shock and brake line length?

Yes, they can. A higher ride height extends the suspension further, so shock travel and brake line flex should be checked after installation. Inspect the lines and wiring for tension at full droop and full compression.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Toyota Sequoia Lift Kits on Amazon