Select your vehicle

Revtek 2.5 Inch Lift Kit – 441

Revtek

Shop Revtek Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Revtek 441 2.5-inch Toyota split spacer lift
  • Front 2.5 inches and rear 2.25 inches
  • Allows 33×12.5 tires, or 35-inch tires with minor trimming
  • Shocks are not included

Description

Overview

The Revtek 441 is a 2.5-inch Toyota suspension lift that uses a split spacer design. It lifts the front 2.5 inches and the rear 2.25 inches, with the rear spacers and a front skid plate spacer included. The kit keeps the factory Toyota steering and suspension geometry and is a bolt-on installation.

Key features

  • Split spacer design
  • 2.5-inch front lift and 2.25-inch rear lift
  • Maintains factory steering and suspension geometry
  • Completely bolt-on installation
  • Made in the USA

Before you install

Spacer lifts change the position of components that were designed for the factory ride height, so the lift is only part of the job. Once the truck sits higher, the driveline, brake lines and steering linkage should be looked at, because each is positioned for a lower stance. A quick check of these items before the first drive helps catch problems early.

Tire choice matters as much as the spacers. Larger tires put more load on wheel bearings and ball joints, and they change the rolling diameter that the speedometer reads. Check that the wheels clear the fenders and liner at full steering lock and at full suspension compression. Keep the spare tire and carrier weight in mind as well, since a heavier setup changes how the truck handles on steep grades.

  • Re-torque lug nuts and spacer hardware after the first few drives
  • Inspect brake lines for stretch after the lift
  • Recheck the front alignment after installation

Specifications

Brand Revtek
Part number 441
UPC 81132301108
Lift height 2.5 inches front
Rear lift 2.25 inches
Suspension type Spacer
Rear lift method Spacers
Tire capacity 33×12.5, or 35 with minor trimming
Shocks Not included
Fitment type Direct fit

Vehicle fitment

It is a Toyota suspension lift. Verify the year, model and trim against your truck before buying.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The kit is a bolt-on installation. The 35-inch tire fit requires minor trimming, so plan on that if you run the larger size.

What’s included

  • Rear lift spacers
  • Front skid plate spacer

Not included: shocks.

SKU: REV441 Category:

Specification

Shipping weight 13.00 lbs
Package dimensions 12.00 × 8.00 × 8.00 in
brands

Questions & Answers

What tire size does the Revtek 441 allow?

The kit allows 33x12.5 tires, and 35-inch tires with minor trimming. Revtek describes its split spacer design as keeping the factory Toyota geometry.

How much lift does the Revtek 441 give?

It gives a 2.5-inch front lift and a 2.25-inch rear lift. The kit uses split spacers and installs as a bolt-on kit, with no change to the factory steering and suspension geometry. Plan on the minor trimming noted above if you run 35-inch tires.

Does the Revtek 441 include shocks?

No. Shocks are not included in the kit. The kit includes the rear lift spacers and the front skid plate spacer, so the existing shocks stay in place unless you choose to replace them.

How often should spacer lift hardware be checked?

Check it after the first few drives and again at regular service intervals. Look for loose nuts, cracked spacer surfaces and signs of rubbing on the tires or fender liners. Retighten the hardware if anything has settled.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Revtek Lift Kits on Amazon