Overview
The Redarc Tow-Pro Switch Insert Panel TPSI-002, part number RAETPSI-002, is a switch insert panel that helps install the Tow-Pro Electric Brake Remote Head in Toyota and Mitsubishi vehicles. It helps create a remote head mount with an OE-style look. The fitment covers Toyota models from 2006 to 2019 and the Mitsubishi Outlander from 2016 to 2019.
The Tow-Pro Electric Brake Remote Head is the unit this panel is built around. The panel carries CARB Executive Order number A-2020-113 and is a direct fit product. The vehicle list below shows each model with its years and trims.
Key features
- Switch insert panel designed around the Tow-Pro Electric Brake Remote Head
- Helps create an OE-style remote head mount
- Fitment covers eight Toyota and Mitsubishi model lines
- Direct fit product
- CARB Executive Order number A-2020-113
Remote head installation planning
A remote head mount places the brake controller control somewhere the driver can reach while driving, so placement matters. Choose a location where the head is easy to see and operate, without blocking airbags, pedals or switches. Plan the cable route before drilling or cutting trim, and keep the wiring away from heat and sharp edges.
Once the panel is installed, check the switch action and the connections periodically. Dust and moisture can work into switch openings, so keep the area clean and dry. Vibration can loosen screws and fasteners, so re-tighten them after the first few drives. Replace any cracked or stiff switch parts before they fail on the road.
- Confirm the remote head is on hand before starting
- Plan the cable route before cutting trim
- Check switch action at each service
Specifications
| Brand | Redarc |
|---|---|
| Part number | RAETPSI-002 |
| Model | TPSI-002 |
| Product type | Tow-Pro Switch Insert Panel |
| Works with | Tow-Pro Electric Brake Remote Head |
| Fitment type | Direct Fit |
| CARB EO number | A-2020-113 |
Vehicle fitment
The manufacturer fitment list covers these Toyota and Mitsubishi vehicles:
- 2006–2012 Toyota RAV4 (Base, EV, Limited, Sport)
- 2008–2014 Toyota FJ Cruiser (Base, Trail Teams Special Edition)
- 2008–2012 Toyota Highlander (Base, Hybrid, Hybrid Limited, Limited, SE, Sport)
- 2008–2019 Toyota Sequoia (Limited, Platinum, SR5, TRD Sport)
- 2015–2019 Toyota Tacoma (Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport)
- 2008–2012 Toyota Tundra (Base, Limited, SR5)
- 2009–2012 Toyota 4Runner (Limited, SR5, Sport, Trail)
- 2016–2019 Mitsubishi Outlander (ES, GT, LE, SE, SEL)
Years outside these ranges are not covered, so the Tacoma before 2015 and the Tundra after 2012 are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The panel is an insert for a remote head mount, so have the Tow-Pro Electric Brake Remote Head on hand before starting. Brake controller wiring should be fused and kept clear of heat and moving parts, and a qualified installer should check the connections.
What’s included
This entry covers the switch insert panel only.
Not included: The Tow-Pro Electric Brake Remote Head, which the panel is designed to hold.











