Overview
The REDARC TPH-017 is a wiring harness that lets you connect a Tow-Pro Elite or Tow-Pro Classic electric brake controller into an existing Tekonsha brake controller harness installation. It is marked universal fit and no vehicles are listed, so the match depends on the harness already in your vehicle.
The harness includes a loom with a compatible connector and fitting instructions. With the Tow-Pro Elite, the plug-and-play design connects one end to the controller and the other to the factory fitted connector behind the dash. The Classic has no mating connector and needs bare wires inserted into the controller after a small modification.
REDARC’s Tech Tip describes installing either controller on a Tekonsha, Curt or Hopkins brake control harness.
Key features
- Connects Tow-Pro Elite or Tow-Pro Classic controllers
- Designed to work with an existing Tekonsha harness
- Loom with compatible connector included
- Fitting instructions included
- Tech Tip covers Tekonsha, Curt and Hopkins harness installs
Before you wire it in
A trailer brake controller only works as well as the wiring behind it, so check the harness before you connect anything. Compare the connector on the existing harness with the one on the controller, and look at the wire colors and pin layout. Mismatched pins are a common reason a controller fails to power up.
Look for corrosion, cracked insulation and loose terminals in the harness first. Repair or replace damaged sections before adding a new controller, since a poor connection can cause intermittent braking. A multimeter helps confirm power and ground at the connector.
- Confirm the controller and harness connectors match before buying
- Inspect the existing harness for corrosion and cracked insulation
- Test power and ground at the connector before final mounting
- Keep the loom clear of moving parts and sharp edges
Specifications
| Brand | REDARC |
|---|---|
| Part number | RAETPH-017 |
| Compatible controllers | Tow-Pro Elite; Tow-Pro Classic with a small modification |
| Existing harness | Tekonsha brake controller harness |
| Included | Loom with compatible connector, fitting instructions |
| Fitment | Universal fit (not vehicle-specific) |
Vehicle fitment
It is a universal fit harness rather than one built for a specific year, make or model. Its fit depends on the Tekonsha brake controller harness already installed in your vehicle.
Confirm that your harness and controller work together before installing.
Installation notes
Follow the REDARC Tech Tip for installs on a Tekonsha, Curt or Hopkins harness. Because the Classic needs bare wires inserted into the brake controller, read the fitting instructions first.
What’s included
A loom with compatible connector and fitting instructions.
Not included: the Tow-Pro Elite or Tow-Pro Classic controller, or the existing Tekonsha harness it connects into.









