Overview
The Redarc TPH-020 is a Tow-Pro brake controller harness that connects an electric brake controller to the factory towing package connector on 2015–2017 Ram 1500, Ram 2500 and Ram 3500 trucks. It works with the Tow-Pro Elite or the Tow-Pro Classic, and it suits owners who tow a trailer with electric brakes and want the controller connected behind the dash.
The Tow-Pro Elite uses a plug-and-play design: one end of the harness plugs into the controller and the other end plugs into the connector already fitted at the factory. The Tow-Pro Classic has no mating connector, so with that controller bare wires are inserted into the brake controller rather than plugged in. That modification is small.
Because the harness comes in several configurations for different Ram models, and mating harness adaptors are available for installations that already use other manufacturers’ custom wiring, the TPH-020 suits both factory-style and existing custom setups.
Key features
- Works with the Tow-Pro Elite and the Tow-Pro Classic brake controllers
- Plugs into the factory towing package connector on Ram trucks
- Connection point is behind the vehicle dash
- Offered in several configurations for different Ram models
- Mating harness adaptors let it work with other makers’ existing custom wiring
- Comes with fitting instructions and a loom with a compatible connector
- CARB EO Number A-2020-114
Ram connection planning
The harness connects a controller to a factory towing connector, so the installation depends on that connector being present. Before starting, confirm the connector is fitted behind the dash. Choosing the right controller comes next: the Elite plugs directly into the harness, while the Classic needs bare wires, which takes more care and time in the cab.
Trailer electric brakes place a steady load on the wiring, so inspect the harness at regular intervals. Look for heat marks on the plug, loose pins and chafed insulation along the loom. If a connection feels warm or intermittent, stop and inspect it before towing. Keep the controller mounted securely so it does not move under braking.
- Check the factory connector is present behind the dash
- Use the fitting instructions for the Classic
- Inspect the plug for heat marks after towing
Specifications
| Brand | Redarc |
|---|---|
| Part number | RAETPH-020 |
| Model | Tow-Pro Brake Controller Harness (TPH-020) |
| Compatible controllers | Tow-Pro Elite and Tow-Pro Classic |
| Connection | Factory towing package connector, behind the vehicle dash |
| Mating adaptors | Available for other manufacturers’ custom wiring |
| CARB EO Number | A-2020-114 |
| Fitment listing | Direct fit |
Vehicle fitment
The TPH-020 fits the 2015–2017 Ram 1500 in the Big Horn, Express, HFE, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, Rebel, SLT, Special Service, Sport and Tradesman trims. It fits the 2015–2017 Ram 2500 in the Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, Power Wagon, SLT and Tradesman trims, and the 2015–2017 Ram 3500 in the Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT and Tradesman trims.
Ram trucks from other model years, and Ram models not named here, are outside this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The connection sits behind the dash, so plan for the work to be done inside the cab. Redarc includes fitting instructions with the harness; read them before you start, especially if you use the Tow-Pro Classic, which needs the bare-wire connection described above. Disconnect the battery before starting any wiring work in the cab.
What’s included
The harness includes the loom with its compatible connector and the fitting instructions.
Not included: the Tow-Pro Elite or Tow-Pro Classic brake controller.









