Overview
The Redarc RAEEBMK-001 is the Tow-Pro Elite Mounting Kit, a bracket for installing the Tow-Pro Elite electric trailer brake controller main unit under a vehicle’s dash. Model EBMK-001. It is a universal fit, so it is not tied to a specific vehicle.
The bracket is designed to fasten to the main unit and connect to the vehicle, which simplifies installation under the dash.
Key features
- Bracket fastens to the main unit with 2 x M4 bolts
- Can be set at right angles, in-line or diagonally across the main unit
- M6 slot and nut and bolt for a suitable M6 stud or M6 hole
- Rigid bracket that can be bent if the installation requires it
Mounting angle and clearance
Under-dash brake controller mounts depend on angle and clearance. Before tightening anything, check that the main unit sits where the driver can reach its controls without stretching, and that it does not press against the steering column, pedals or knee area. Test the position with the vehicle still in place rather than on a bench.
Vibration is the main long-term concern. Use the bolts to hold the unit firmly, make sure the bracket is not stressed by the wiring, and recheck fasteners after the first few drives. Route the harness so it can move slightly without pulling on the connectors. Keep the area around the mounting point free of loose items, and taking time with the angle now can save a rework later.
Specifications
| Brand | Redarc |
|---|---|
| Part number | RAEEBMK-001 |
| Model | EBMK-001 |
| Product type | Brake controller mounting bracket kit |
| Compatible unit | Tow-Pro Elite electric trailer brake controller main unit |
| Main unit fastening | 2 x M4 bolts |
| Vehicle connection | M6 slot with nut and bolt |
| Construction | Rigid, can be bent to suit installation |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit and is not tied to a specific vehicle. Before installing, check that a suitable M6 stud or M6 hole is available under the dash.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bracket fastens to the main unit with 2 x M4 bolts, which can be set at right angles, in-line or diagonally across the unit. The M6 slot and nut and bolt connect to the vehicle on a suitable M6 stud or hole. Disconnect the vehicle battery before working under the dash.
What’s included
The kit is a mounting bracket for the Tow-Pro Elite main unit. Check the package contents against your installation before starting.
Not included: the Tow-Pro Elite main unit, which the bracket is designed to hold.













