Overview
The Redarc Tow-Pro TPH-018 is a wiring harness that connects a Tow-Pro Elite or Tow-Pro Classic electric brake controller to an existing Hopkins brake controller harness installation. It is a universal fit part, so the vehicle needs an existing Hopkins harness installation.
The harness contains fitting instructions and a loom with a compatible connector. With the Tow-Pro Elite it has a plug-and-play design: one end plugs into the brake controller connector and the other into the factory fitted connector behind the vehicle dash. The harness also connects to the Tow-Pro Classic with a small modification, because the Classic has no mating connector and needs bare wires inserted into the controller. Redarc points to its Tech Tip for installing an Elite or Classic using a Tekonsha, Curt or Hopkins harness.
Key features
- Connects the Tow-Pro Elite or Tow-Pro Classic to an existing Hopkins brake controller harness
- Plug-and-play with the Tow-Pro Elite
- Plugs into the factory fitted connector behind the dash
- Includes fitting instructions and a loom with compatible connector
- Works with the Tow-Pro Classic with a small modification
- Universal fit
Compatibility checks
A universal fit harness depends on what is already under the dash. Before ordering, identify the existing brake controller harness and confirm it is a Hopkins type, since the TPH-018 connects into that wiring. Look for the factory fitted connector behind the dash, and check that the plug and pin layout match the harness before you buy.
If the Classic is used, plan for the bare-wire connection. Strip and insert the wires carefully, and crimp or secure them so they cannot pull loose on the road. Re-check the connection after the first drive, since vibration can loosen a poor joint over time.
- Identify the existing harness before buying
- Compare the plug and pin layout to the factory connector
- Plan for the bare-wire step if using a Classic
Specifications
| Brand | Redarc |
|---|---|
| Part number | TPH-018 (also written RAETPH-018) |
| Product type | Brake controller wiring harness |
| Compatible controllers | Tow-Pro Elite, Tow-Pro Classic (with modification) |
| Connection | Existing Hopkins brake controller harness |
| Included with harness | Fitting instructions and loom with compatible connector |
| Fit type | Universal fit |
Vehicle fitment
It works with an existing Hopkins brake controller harness installation, so the vehicle needs that harness and a factory fitted connector behind the dash. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Wire the accessory with correctly sized wire and a fuse or breaker close to the power source. Disconnect the battery before working on wiring, route wiring away from heat, sharp edges and moving parts, and protect connections from moisture. Have a qualified installer handle the wiring if you are unsure. Check local regulations on auxiliary lighting before use on public roads.
What’s included
The Tow-Pro harness includes fitting instructions and the loom with compatible connector.
Not included: a brake controller, which must be purchased separately.









