Overview
The REDARC TPH-010 is a Tow-Pro brake controller harness that connects a Tow-Pro Elite or Tow-Pro Classic electric brake controller to a factory towing package connector behind the dash. It fits Chevrolet and GMC full-size trucks and SUVs from 2014 to 2018.
The Elite connects at both ends of the harness, while the Classic has no mating connector and needs bare wires inserted into the controller after a small modification. A loom with a compatible connector and fitting instructions are included, and mating harness adaptors suit other manufacturers’ existing custom wiring.
Key features
- Connects a Tow-Pro Elite or Tow-Pro Classic brake controller
- Plug-and-play connection with the Tow-Pro Elite
- Hooks up to the factory towing package connector behind the dash
- Loom with compatible connector and fitting instructions
- Mating harness adaptors for other manufacturers’ custom wiring
- CARB EO number A-2020-114
Choosing a towing setup
A brake controller harness only carries the signal between the controller and the vehicle’s wiring, so the rest of the setup matters as much as the connection. The trailer’s electric brakes, wiring and the controller’s gain setting all affect how the trailer stops. After installing, test the controller with the trailer connected before a longer trip.
Controller choice and connector type can change the installation. Bare-wire hookups need careful splicing and secure connections, while a plug-in connector reduces that work. Check the harness connectors for corrosion, cracked insulation and loose pins each time you connect the trailer, and keep the loom clear of moving parts and heat sources.
- Check trailer brake wiring and plug condition
- Re-test gain after changing the trailer load
- Keep the loom secured away from exhaust heat
Specifications
| Brand | REDARC |
|---|---|
| Part number | RAETPH-010 |
| CARB EO number | A-2020-114 |
| Compatible controllers | Tow-Pro Elite; Tow-Pro Classic with a small modification |
| Mounting location | Behind the vehicle dash |
| Included | Loom with compatible connector, fitting instructions |
| Fitment | Direct fit |
Vehicle fitment
It fits 2014–2018 Chevrolet Silverado 1500 (Custom, High Country, LS, LT, LTZ, SSV, WT); 2015–2018 Chevrolet Silverado 2500 HD and 3500 HD (High Country, LT, LTZ, WT); 2015–2018 Chevrolet Suburban (LS, LT, LTZ, Premier); 2016–2018 Chevrolet Suburban 3500 HD (LS, LT); 2014–2018 GMC Sierra 1500 (Base, Denali, SLE, SLT); 2015–2018 GMC Sierra 2500 HD and 3500 HD (Base, Denali, SLE, SLT); and 2015–2018 GMC Yukon and Yukon XL (Denali, SLE, SLT).
Model years before 2014 and after 2018 are not on this list, and Chevrolet Tahoe models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the Classic has no mating connector, install it by inserting bare wires into the controller as the included instructions describe. Keep the harness routed behind the dash, where the factory connector sits.
What’s included
A loom with compatible connector and fitting instructions.
Not included: a Tow-Pro Elite or Tow-Pro Classic brake controller, which the harness connects.









