Overview
The REDARC TPH-019 is a Tow-Pro harness that links a Tow-Pro Elite or Tow-Pro Classic electric brake controller into an existing Curt brake controller harness. It is marked universal fit and has no vehicle list, so fit depends on the Curt harness already installed in your vehicle.
The kit includes a loom with a compatible connector and fitting instructions. The Elite uses a plug-and-play connection, with one end of the harness going into the controller and the other into the connector behind the dash. The Classic needs a small modification because it has no mating connector.
Key features
- Links Tow-Pro Elite or Classic controllers to an existing Curt harness
- Loom with compatible connector included
- Fitting instructions included
- Plug-and-play connection for the Tow-Pro Elite
- Tech Tip covers Tekonsha, Curt and Hopkins harness installs
Matching your existing harness
Universal fit harnesses depend on what is already wired into the vehicle, so the first step is to identify the existing Curt harness. Look at the connector behind the dash and compare its pin layout with the harness you plan to use. A mismatch usually means the harness will not seat correctly, and forcing the plug can damage both ends.
The Tow-Pro Classic brings a different wiring task, since bare wires are inserted into the controller. Strip wires cleanly, keep the connections secure and insulated, and avoid stray strands touching other terminals. Before reconnecting the battery, confirm every wire is in its correct position and that the loom is clear of moving parts.
- Identify the existing harness before ordering
- Compare the pin layout at the dash connector
- Insulate every bare wire connection
Specifications
| Brand | REDARC |
|---|---|
| Part number | RAETPH-019 |
| Compatible controllers | Tow-Pro Elite; Tow-Pro Classic with a small modification |
| Existing harness | Curt brake controller harness |
| Included | Loom with compatible connector, fitting instructions |
| Fitment | Universal fit (not vehicle-specific) |
Vehicle fitment
It is a universal fit harness with no vehicle-specific list. Its fit depends on the Curt harness already installed in your vehicle, not on a specific year, make or model.
Check that the harness matches your existing installation before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Read the REDARC Tech Tip before wiring the Classic, since the Classic needs bare wires inserted into the controller. The Tech Tip covers Tekonsha, Curt and Hopkins harness installs.
What’s included
A loom with compatible connector and fitting instructions.
Not included: the Tow-Pro Elite or Tow-Pro Classic controller, and the Curt harness it connects into.









