Overview
The Redarc TPH-005 is a wiring harness for the Tow-Pro Elite and Tow-Pro Classic electric brake controllers. It plugs into the factory towing package connector on Ford and Lincoln vehicles. It fits the 2008–2013 Ford F-250 Super Duty and F-350 Super Duty and the 2013–2014 Lincoln Navigator and Navigator L, so it suits owners who want a controller connected through a plug-in harness rather than a custom wiring job.
The harness connects behind the vehicle dash. One end plugs into the brake controller connector and the other end plugs into the factory fitted connector, which is the plug-and-play arrangement Redarc describes. The Tow-Pro Classic has no mating connector, so with that controller bare wires are inserted into the brake controller instead, a small modification Redarc describes.
Redarc also offers the harness in several configurations for different Ford and Lincoln models, along with mating harness adaptors for installations that already use other manufacturers’ custom wiring.
Key features
- Connects the Tow-Pro Elite or Tow-Pro Classic electric brake controller
- Plugs into the factory towing package connector on Ford and Lincoln vehicles
- Connection point sits behind the vehicle dash
- Available in multiple configurations for a range of Ford and Lincoln models
- Mating harness adaptors available for other manufacturers’ custom wiring
- Includes fitting instructions and a loom with compatible connector
- CARB EO Number A-2020-114
Tow-Pro harness and controller pairing
A brake controller harness moves the controller’s signal to the vehicle’s towing connector, so the harness must match both the controller and the vehicle. Pairing a harness with a controller that is not designed for it can lead to weak braking signals and wasted setup time.
Mount the controller where it is easy to reach and see while driving, and route the cable away from pedals and the steering column. After installation, test the trailer brakes with a short run in a safe area before towing. Keep the harness connector dry and free of dust, since water is a common cause of poor connections.
- Test trailer brakes before a long tow
- Keep the connector dry
- Route cables clear of pedals
Specifications
| Brand | Redarc |
|---|---|
| Part number | RAETPH-005 |
| Model | Tow-Pro Brake Controller Harness (TPH-005) |
| Compatible controllers | Tow-Pro Elite and Tow-Pro Classic |
| Connection | Factory towing package connector, behind the vehicle dash |
| Mating adaptors | Available for other manufacturers’ custom wiring |
| CARB EO Number | A-2020-114 |
| Fitment listing | Direct fit |
Vehicle fitment
It fits the 2008–2013 Ford F-250 Super Duty and 2008–2013 Ford F-350 Super Duty in the Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL and XLT trims, and the 2013–2014 Lincoln Navigator in the Base trim and the 2013–2014 Lincoln Navigator L.
Ford and Lincoln models and years outside these, including the F-150, are not in the Redarc fitment list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The harness plugs in at the factory towing package connector behind the dash. With the Tow-Pro Classic, the bare-wire modification described above is needed, so read the fitting instructions supplied with the harness before starting. Disconnect the battery before working behind the dash.
What’s included
The harness includes the loom with compatible connector and the fitting instructions.
Not included: the Tow-Pro Elite or Tow-Pro Classic brake controller, which the harness connects to.









