Overview
The Redarc Tow-Pro Brake Controller Harness, part number TPH-007 (RAETPH-007), is a plug-and-play wiring harness that connects a Tow-Pro Elite or Tow-Pro Classic electric brake controller to the factory towing package connector on listed Ford vehicles from 2005-2018, including the F-150, Expedition and Flex.
The harness installs behind the dash and connects directly to the Ford or Lincoln factory towing package connector. It comes with fitting instructions and a loom with a compatible connector. The CARB EO Number is A-2020-114.
Key features
- Connects the Tow-Pro Elite or Tow-Pro Classic electric brake controller
- Plug and play design for the Tow-Pro Elite
- Installs directly to the factory towing package connector
- Hooks up behind the vehicle dash
- Includes fitting instructions and a loom with a compatible connector
- Works with the Tow-Pro Classic with a small modification
- CARB EO Number A-2020-114
Towing setup checks
A brake controller harness only moves the trailer brakes when the wiring, controller settings and trailer brakes all work together. After the harness is connected, check the controller’s gain setting on a short, flat drive and adjust it gradually. Look for a trailer that stops smoothly without locking the wheels, and make sure the controller does not drop out when the trailer is connected or disconnected.
Trailer brakes and wiring wear over time, so inspect the connector and the loom every few months. Look for chafed insulation, corroded pins or a loose connector behind the dash, and keep the harness clear of pedals and the steering column. Re-check the connection after any work near the dash or the factory towing package connector.
- Test the controller at low speed before a longer tow
- Check the connector for corrosion or loose pins
- Keep the loom clear of pedals and the steering column
Specifications
| Brand | Redarc |
|---|---|
| Part number | TPH-007 |
| Alternate part number | RAETPH-007 |
| Product type | Brake controller wiring harness |
| Compatible controllers | Tow-Pro Elite, Tow-Pro Classic |
| Connection | Factory towing package connector |
| Location | Behind the vehicle dash |
| CARB EO Number | A-2020-114 |
| Fitment type | Direct fit |
Vehicle fitment
The TPH-007 harness fits the 2005-2018 Ford Expedition; the 2007-2017 Expedition EL; the 2018 Expedition Max; the 2009-2018 Ford F-150; the 2017-2018 F-250 and F-350 Super Duty; and the 2012-2018 Ford Flex. Confirm fit for your vehicle’s year, model and trim before ordering.
Redarc says harnesses come in multiple configurations for Ford and Lincoln models, and this list names Ford models only. Years differ by model. The Tow-Pro Classic has no mating connector and needs bare wires inserted, so it needs a small modification. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Make electrical connections with the correct wire gauge and fusing for the load. Disconnect the battery before working on vehicle wiring, protect wires from heat and moving parts, and test every function before driving. Follow the fitting instructions supplied with the harness, and confirm that the trailer lights and brakes work before towing.
What’s included
- Wiring harness
- Loom with a compatible connector
- Fitting instructions
Not included: the Tow-Pro Elite or Tow-Pro Classic brake controller, which is a separate item.









