Select your vehicle

Curt Manufacturing Brake Control Adapter Harness – 51313

Curt Manufacturing

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Curt Manufacturing brake control adapter harness, part number CRT51313
  • Plug-and-play wire kit for wiring a brake controller unit
  • Designed so you can tell what each wire does and where it goes
  • Marked Universal Fit; no specific vehicle is named

Description

Overview

The Curt Manufacturing CRT51313 is a brake control adapter harness, a wire kit for wiring up a brake controller unit with a plug-and-play connection. It sits in the Towing brake controllers and electrical range and is marked Universal Fit.

The kit is designed for trailer owners who want to avoid trial-and-error wiring. It is built to make clear what each wire does and where it goes.

Key features

  • Plug-and-play operation for a brake controller unit
  • Wire kit meant to show what each wire does
  • Brake control adapter harness format
  • Universal Fit marking, no vehicle named

Plug-and-play wiring basics

A brake control harness is a set of color-coded leads that run between the vehicle side of the system and the brake controller, so the job is mostly matching wires to their functions. Plug-and-play kits cut down on guesswork but still need the correct controller and the right circuit for each lead. Before cutting or splicing anything, confirm which wires your controller requires and label them as you go.

Route the harness away from exhaust heat, moving parts and sharp edges, and secure it with clips so it does not sag under the dash or behind the seat. Check the connectors each season for corrosion, and look for chafed insulation where the wire passes through a grommet. A harness that starts cutting out or causing the controller to lose power usually points to a loose or damaged connection.

Specifications

Brand Curt Manufacturing
Part number CRT51313
Product type Brake control adapter harness
Fitment Universal Fit

Vehicle fitment

This harness is marked Universal Fit rather than matched to a named tow vehicle, so no year, make, model or trim is given. Compatibility depends on the brake controller you plan to wire into.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

The wire kit is the only item covered. Check the wire lengths and connector counts against your installation before starting.

Not included: The brake controller unit is not part of this kit.

Questions & Answers

What is Curt Manufacturing part CRT51313?

CRT51313 is a Curt Manufacturing brake control adapter harness, a wire kit for wiring a brake controller unit with a plug-and-play connection. It helps you see what each wire does and where it goes.

Will the CRT51313 fit my truck or trailer?

No vehicle is named for it. The manufacturer marks it Universal Fit, so the match depends on your brake controller and tow setup. Confirm your vehicle's year, model and trim before ordering.

Does the CRT51313 come with a brake controller?

No. The product is the adapter harness only. A brake controller unit is what this harness connects to, so you need one separately.

Do I need a brake controller before I install this harness?

Yes. The harness connects to a brake controller unit, so the controller must be on hand before you start the install. Confirm the controller's wiring requirements match the harness leads before cutting anything.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon