Overview
The Icon Suspension V.S. 2.0 Aluminum Series Rear Shock, part number 26518, is a gas charged monotube shock absorber for the rear axle of a Jeep Wrangler JK with a 4-inch lift. It covers the 2007–2017 Jeep Wrangler (JK) in two-door and four-door form, including the Unlimited.
The V.S. 2.0 is a practical upgrade for daily street use and weekend trail driving. It is valved for the JK and can be rebuilt and revalved later, so the damping can be retuned when tire size, load or driving style changes.
The rear shock is sold individually, and each unit includes top mounting hardware and bushings, so plan on one shock per side. Icon’s front version of this design is a separate listing.
Key features
- Nitrogen charged monotube with an internal reservoir
- Premium grade 5WT shock oil for consistent damping
- 100% rebuildable and 100% revalveable
- Polyurethane bushings and zinc plated sleeves
- Buna top out bumper to keep operation quiet
- 6061 aluminum rod end and 6063 anodized aluminum body
- Made in the U.S.A.
Rear suspension considerations
A rear shock on a JK does more than control bounce. It manages the rear axle as the leaf springs compress and rebound, and it helps keep the rear tires on the ground over ruts and ledges. With a lift, the shock runs at a different angle, so the mounting points and bushings see more load than they did at stock height.
Inspect the upper bushing, the lower mounting bolt and the shaft before reinstalling. A small amount of oil on the body can be normal, but a heavy film or a shaft with pitting means the unit should be serviced. Replacing both rear shocks together keeps the ride even from side to side.
Heavier bumpers, racks or bigger tires increase the load the rear shocks handle. Rebuilding and revalving lets the damping be adjusted to match those changes. Keep the bump stops and rear springs in good condition as well, since worn parts there can make a shock feel weaker than it is.
- Check upper bushings for cracking or play
- Look for heavy oil film or shaft pitting
- Retune damping after large load or tire changes
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 26518 |
| UPC | 700006854401 |
| Position | Rear |
| Shock series | V.S. 2.0 Aluminum Series |
| Body | 6063 anodized aluminum |
| Shaft | 5/8 inch polished nitro steel |
| Rod end | 6061 aluminum |
| Bushings | Polyurethane with zinc plated sleeves |
| Top out bumper | Buna |
| Charge | Gas charged, nitrogen |
| Sold as | Individual shock |
| Made in | U.S.A. |
Vehicle fitment
It fits the 2007–2017 Jeep Wrangler (JK) in 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, plus the Unlimited versions of those trims. It is a direct fit for the JK rear suspension, with valving set for that vehicle.
The list does not include the Wrangler TJ, the Wrangler LJ, or the Wrangler JL generation. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The upper end uses the included top mounting hardware and bushings, while the lower end attaches with the stock bolt. The shock is set up for a 4-inch lift, so check that the rear lift matches before installing. Work with the rear axle supported on stands and the wheels off the ground.
What’s included
One V.S. 2.0 rear shock with top mounting hardware and bushings.
Not included: The lower mounting bolt, because the stock bolt is reused.