Overview
The Rancho RS999310 is a rear shock absorber from the RS9000XL Series with nine-position manual or remote tuning. It is a direct fit for the 2006-2010 Hummer H3 and the 2010 Hummer H3T in the rear position, for a vehicle with a 4 in. lift.
Built with an 18mm chrome rod and a 2.75-in. (70mm) body, this shock suits Hummer owners who want adjustable damping without changing the unit. Red bushings and a protective boot complete the build.
Key features
- Nine-position myRide tuning, manual or remote
- 18mm chrome rod diameter
- Nitrogen gas charged body
- Liquid metallic finish
- Red bushings and a protective boot
- Limited lifetime warranty from Rancho
Rear shock maintenance tips
Rear shocks handle the weight the axle carries over rough ground and under load. A nitrogen gas charge reduces the chance of foaming when the shock runs hot on extended trail use. Keeping the body clean and the rod free of grit helps the seals last longer.
Red bushings and a protective boot both guard the shock against wear. Inspect the boot for tears after each trail outing, since dirt that reaches the rod can damage the seal. Replacing a torn boot is usually simpler than replacing a shock.
When installing, confirm the bracket and hardware you already own match the shock before removing the old unit. Tighten mounts after the first few drives, and check for leaks or unusual noise over bumps. Because adjustable tuning is involved, record the setting you choose so you can return to it after service.
- Wash mud off the rod after trail runs
- Check the boot for tears regularly
- Look for oil on the body or leaks at the seal
- Write down your tuning setting before service
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999310 |
| UPC | 10039703093108 |
| Shock series | RS9000XL |
| Body diameter | 2.75 in. (70mm) |
| Rod diameter | 18mm chrome |
| Tuning | myRide 9-position, manual or remote |
| Charge | Nitrogen gas charged |
| Finish | Liquid metallic |
| Bushings | Red, polyurethane |
| Position | Rear |
| Fitment type | Direct fit |
| Lift height | w/4 in. lift |
| Warranty | Limited lifetime |
Vehicle fitment
Direct fit in the rear position for these vehicles:
- 2006–2010 Hummer H3 (Alpha, Base, Championship Series, X)
- 2010 Hummer H3T (Alpha, Base)
Other Hummer models and years outside these ranges are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
A protective boot is included. Mounting brackets are not part of this package, so check the package contents against your installation before starting.














