Select your vehicle

Rancho RS7000MT Monotube Shock – RS7150

Rancho

Shop GMC K1500 Shock Absorbers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rancho RS7150 front RS7000MT Series monotube shock
  • Fits full-size Chevrolet and GMC trucks and SUVs from 1988 to 2000
  • Lift/drop rating 0 in.
  • Ten stage velocity-sensitive valving and 14mm chrome rod
  • Part number RS7150, UPC 39703003551

Description

Overview

The Rancho RS7150 is a front RS7000MT Series monotube shock with a gas-charged body. It fits full-size Chevrolet and GMC trucks and SUVs from model years 1988–2000, and it also fits the 1999–2000 Cadillac Escalade. Its lift/drop rating is 0 in.

The monotube is gas charged at high pressure, which helps dissipate heat and supports damping efficiency. Its ten stage valving is velocity-sensitive, so damping responds to a wide range of off-road obstacles. The body has a brushed-zinc clear coated finish, black natural rubber bushings and a 14mm chrome rod.

Key features

  • Front position, direct fit rating
  • Gas charged monotube design
  • Ten stage velocity-sensitive valving
  • 14mm chrome rod
  • Black natural rubber bushings
  • Brushed-zinc clear coated finish
  • Protective boot included

Signs a front shock needs replacing

A front shock controls how the axle settles over bumps and how the truck responds when braking and turning. As the valving and seals wear, the body can start to bounce after dips and feel loose on washboard roads. Uneven tire wear along the front tread can also point to a damper that is no longer holding the tire steady.

When inspecting an old shock, look for oil on the outside of the body, dents in the tube, torn boots and bushings that have cracked or separated. Check the upper and lower mounts for play, since worn mounts add movement that the new shock cannot control. Those mounts are often replaced in the same job, so inspect them before bolting in the new unit.

  • Oil film down the shock body
  • Cracked or split rubber bushings
  • Torn or missing protective boot
  • Excess bounce after bumps
  • Loose or worn mounting hardware

Specifications

Brand Rancho
Part number RS7150
UPC 39703003551
Series RS7000MT Series
Shock type Monotube, gas charged
Position Front
Body diameter 1.97 inch (50mm)
Rod 14mm chrome
Valving Ten stage, velocity-sensitive
Bushings Black natural rubber
Finish Brushed-zinc clear coated
Lift height rating 0 in. Lift/Drop
Fitment type Direct fit

Vehicle fitment

Listed fitment covers the 1999–2000 Cadillac Escalade (Base); the 1992–1994 Chevrolet Blazer; the 1988–1999 Chevrolet K1500; the 1992–1999 Chevrolet K1500 Suburban; the 1988–2000 Chevrolet K2500 and K3500; the 1995–2000 Chevrolet Tahoe; the 1989–1991 Chevrolet V3500; the 1988–1999 GMC K1500; the 1992–1999 GMC K1500 Suburban; the 1988–2000 GMC K2500 and K3500; the 1988–1991 GMC V3500; and the 1992–2000 GMC Yukon. Listed trims run from Base and Silverado to Sierra SLE, Tahoe Z71 and Yukon Denali.

Model years outside the ranges above and models not named in the list are not covered. Confirm your vehicle’s year, model and trim before ordering.

What’s included

Front shock with protective boot included. Gather any bolts or brackets your installation requires before starting.

SKU: RANRS7150 Category:

Specification

Shipping weight 5.00 lbs
Package dimensions 24.20 × 3.30 × 3.30 in
brands

Fitment

VehicleYearsTrims
Cadillac Escalade1999–2000Base
Chevrolet Blazer1992–1994Base, Cheyenne, Silverado, Silverado Sport
Chevrolet K15001988–1999Base, Cheyenne, LS, Scottsdale, Silverado, Sport, WT
Chevrolet K1500 Suburban1992–1999Base, LS, LT, Silverado
Chevrolet K25001988–2000Base, Cheyenne, LS, Scottsdale, Silverado, WT
Chevrolet K35001988–2000Base, Cheyenne, LS, Scottsdale, Silverado
Chevrolet Tahoe1995–2000Base, LS, LT, Z71
Chevrolet V35001989–1991Cheyenne, Scottsdale, Silverado
GMC K15001988–1999Sierra, Sierra SL, Sierra SLE, Sierra SLS, Sierra SLT, Sierra SLX, Sierra Special, Sierra Sport
GMC K1500 Suburban1992–1999Base, SLE, SLT
GMC K25001988–2000Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX
GMC K35001988–2000Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX
GMC V35001988–1991Base, High Sierra, SLE, Sierra Classic
GMC Yukon1992–2000Base, Denali, GT, SL, SLE, SLT, Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Which vehicles does the Rancho RS7150 fit?

It fits Chevrolet and GMC full-size K-series trucks, Suburban, Tahoe and Yukon models from 1988–2000, the Chevrolet Blazer from 1992–1994, and the 1999–2000 Cadillac Escalade. Confirm fit for your vehicle's year, model and trim before ordering.

Is the RS7150 a front or rear shock?

It is a front shock. Its position is front, it has a 0 in. lift/drop rating, and it is an RS7000MT Series gas-charged monotube.

What part number and UPC identify the RS7150?

The part number is RS7150 and the UPC is 39703003551. The brand is Rancho and the series is RS7000MT. The shock has a 14mm chrome rod and ten stage velocity-sensitive valving.

Should both front shocks be replaced together?

Usually, yes. Front shocks wear at similar rates, and replacing both keeps damping even from side to side. Mismatched shocks can pull the steering or change how the truck handles on uneven ground, so inspect the opposite side before deciding.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop GMC K1500 Shock Absorbers on Amazon