Overview
The Rancho RS7380 is a front monotube shock from the RS7000MT Series for 2011–2017 Chevrolet Silverado and GMC Sierra 2500 HD trucks and 2011–2016 3500 HD models, listed with a 4 in. lift.
It is gas charged with a high pressure nitrogen charge and uses application specific valving. The body is 2 inch in diameter, and the finish is brushed-zinc with a clear coat.
Key features
- Gas charged monotube with high pressure charge
- Application specific valving
- 2 inch diameter shock body
- Brushed-zinc finish with clear coat
- Direct fit mounting for the listed HD trucks
Front shocks and lift height
Lift height changes the angle and length of the front suspension, so the shock has to match the truck’s ride height as well as its model year. A shock set for the wrong height can run out of travel on compression or extension. Gas-charged monotube shocks help control damping under heavy front loads, such as plows or winch-equipped bumpers, where heat builds up quickly.
Front shocks are usually replaced in pairs so steering response and ride height stay even from side to side. After installation, check the tie rod ends and upper mounts for play, and have the alignment checked because damping changes can shift how the front tires wear. Keep the dust boot clean and inspect it for splits after each season of trail use.
- Measure ride height before choosing shock length
- Check upper mount bolts after the first drive
- Inspect the dust boot for splits or grit damage
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS7380 |
| UPC | 39703006477 |
| Shock series | RS7000MT Series |
| Position | Front |
| Shock type | Monotube, gas charged |
| Lift height | w/4 in. Lift |
| Body diameter | 2 inch |
| Finish | Brushed-zinc, clear coated |
| Mounting | Direct fit |
Vehicle fitment
It fits the 2011–2017 Chevrolet Silverado 2500 HD, the 2011–2016 Chevrolet Silverado 3500 HD, the 2011–2017 GMC Sierra 2500 HD and the 2011–2016 GMC Sierra 3500 HD. Silverado trims are High Country, LT, LTZ and WT, and Sierra trims are Base, Denali, SLE, SLT and WT.
Standard 1500 trucks are not on this list, and model years outside these ranges are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The fitment is set for a 4 in. lift, so confirm your truck’s suspension height matches before installing this front shock.
What’s included
The RS7380 front shock.
Not included: no boot or hardware is named in Rancho’s details.












