Overview
The Rancho RS999128 is a front shock absorber in the RS9000XL Series, gas charged and fitted with an 18mm piston rod. It offers 9-position manual or remote tuning, which Rancho describes as a simple fingertip adjustment for comfort on the road and control off-road.
This shock is intended for Jeep vehicles. Confirm fit for your vehicle’s year, model and trim, and confirm your suspension height before ordering.
Key features
- Front position in the RS9000XL Series
- Nitrogen gas charge
- 18mm diameter piston rod
- 9-position manual or remote tuning
- Protective boot included
Ride feel and adjustment
Damping controls how quickly a spring settles after it compresses or extends. A firmer setting limits body roll and dive during braking, while a softer setting absorbs small bumps and washboard better. Most drivers find that a middle setting covers both pavement and light trails, then adjust for longer runs on rougher ground.
Front shocks respond to tire pressure, bushings and steering geometry as well, so a change in one can alter how the others feel. Look for uneven tire wear, a bouncing front end or a steering wheel that wanders on the highway. Those signs can point to worn damping rather than a tire or alignment problem, so inspect the shock before blaming other parts.
- Test each setting on the same road
- Note tire pressure before adjusting
- Check for leaks along the body
- Recheck the setting after any suspension change
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999128 |
| Shock series | RS9000XL Series |
| Position | Front |
| Fitment type | Direct Fit |
| Lift range | Printed as 0 to 1? (unclear) |
| Piston rod diameter | 18mm |
| Tuning | 9-position manual/remote |
| Charge | Gas charged with nitrogen |
| Protective boot | Included |
Vehicle fitment
Match your vehicle’s year, model and trim to this shock before ordering, since those details decide the fit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the lift range reads 0 to 1?, confirm the rating against your suspension height before installing this shock.
What’s included
A front shock absorber with protective boot.
Not included: Mounting hardware is not included. Check the package contents against your installation before starting.














